lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: memory-controllers: Convert Samsung Exynos SROM bindings to json-schema
On Sat, Sep 07, 2019 at 04:44:42PM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos SROM controller bindings to DT schema format
> using json-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> .../memory-controllers/exynos-srom.txt | 79 ----------
> .../memory-controllers/exynos-srom.yaml | 136 ++++++++++++++++++
> 2 files changed, 136 insertions(+), 79 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml


> diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> new file mode 100644
> index 000000000000..9573bcfd68bf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/exynos-srom.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SoC SROM Controller driver
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +description: |+
> + The SROM controller can be used to attach external peripherals. In this case
> + extra properties, describing the bus behind it, should be specified.
> +
> +properties:
> + compatible:
> + items:
> + - const: samsung,exynos4210-srom
> +
> + reg:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 2
> +
> + "#size-cells":
> + const: 1
> +
> + ranges:
> + description: |
> + Reflects the memory layout with four integer values per bank. Format:
> + <bank-number> 0 <parent address of bank> <size>
> +
> +patternProperties:
> + "^.*@[0-9]+,[0-9]+$":

How many chip selects? Can be a single digit?

Also, these should be hex values.

> + type: object
> + description:
> + The actual device nodes should be added as subnodes to the SROMc node.
> + These subnodes, in addition to regular device specification, should
> + contain the following properties, describing configuration
> + of the relevant SROM bank.
> +
> + properties:
> + reg:
> + description:
> + Bank number, base address (relative to start of the bank) and size
> + of the memory mapped for the device. Note that base address will be
> + typically 0 as this is the start of the bank.
> + maxItems: 1
> +
> + reg-io-width:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [1, 2]
> + description:
> + Data width in bytes (1 or 2). If omitted, default of 1 is used.
> +
> + samsung,srom-page-mode:
> + description:
> + If page mode is set, 4 data page mode will be configured,
> + else normal (1 data) page mode will be set.
> + type: boolean
> +
> + samsung,srom-timing:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + - items:
> + minItems: 6
> + maxItems: 6
> + description: |
> + Array of 6 integers, specifying bank timings in the following order:
> + Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
> + Each value is specified in cycles and has the following meaning
> + and valid range:
> + Tacp: Page mode access cycle at Page mode (0 - 15)
> + Tcah: Address holding time after CSn (0 - 15)
> + Tcoh: Chip selection hold on OEn (0 - 15)
> + Tacc: Access cycle (0 - 31, the actual time is N + 1)
> + Tcos: Chip selection set-up before OEn (0 - 15)
> + Tacs: Address set-up before CSn (0 - 15)
> +
> + required:
> + - reg
> + - samsung,srom-timing
> +
> +required:
> + - compatible
> + - reg
> +
> +allOf:
> + - if:
> + anyOf:
> + - required: [ "#address-cells" ]
> + - required: [ ranges ]
> + - required: [ "#size-cells" ]
> + then:
> + required:
> + - "#address-cells"
> + - ranges
> + - "#size-cells"

I don't think this is necessary as the core schema should take care of
it. This can also be expressed using 'dependencies'.

Rob

\
 
 \ /
  Last update: 2019-09-13 16:38    [W:0.045 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site