lkml.org 
[lkml]   [2019]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [PATCH bpf-next 08/11] samples: bpf: makefile: base progs build on makefile.progs
    On Fri, Sep 13, 2019 at 09:41:25PM +0000, Yonghong Song wrote:
    >
    >
    >On 9/10/19 11:38 AM, Ivan Khoronzhuk wrote:
    >> The main reason for that - HOSTCC and CC have different aims.
    >> It was tested for arm cross compilation, based on linaro toolchain,
    >> but should work for others.
    >>
    >> In order to split cross compilation (CC) with host build (HOSTCC),
    >> lets base bpf samples on Makefile.progs. It allows to cross-compile
    >> samples/bpf progs with CC while auxialry tools running on host built
    >> with HOSTCC.
    >
    >I got a compilation failure with the following error
    >
    >$ make samples/bpf/
    > ...
    > LD samples/bpf/hbm
    > CC samples/bpf/syscall_nrs.s
    >gcc: error: -pg and -fomit-frame-pointer are incompatible
    >make[2]: *** [samples/bpf/syscall_nrs.s] Error 1
    >make[1]: *** [samples/bpf/] Error 2
    >make: *** [sub-make] Error 2
    >
    >Could you take a look?
    Yes, sure.
    Ilias also observer this, interesting that on my setup for cross and
    native build on arm and arm64 doesn't have this error. Now I see log
    and know how to proceed, I will fix it, maybe by using another var
    for cflags.

    Despite of it, just to be sure in order to avoid smth like this at least
    for native build, I will add one more patch like:

    "
    samples: bpf: makefile: don't use host cflags when cross compile

    While compile natively, the hosts cflags and ldflags are equal to ones
    used from HOSTCFLAGS and HOSTLDFLAGS. When cross compiling it should
    have own, used for target arch. While verification, for arm, arm64 and
    x86_64 the following flags were used alsways:

    -Wall
    -O2
    -fomit-frame-pointer
    -Wmissing-prototypes
    -Wstrict-prototypes

    So, add them as they were verified and used before adding
    Makefile.progs, but anyway limit it only for cross compile options as
    for host can be some configurations when another options can be used,
    So, for host arch samples left all as is, it allows to avoid potential
    option mistmatches for existent environments.
    "

    +ifdef CROSS_COMPILE
    +ccflags-y += -Wall
    +ccflags-y += -O2
    +ccflags-y += -fomit-frame-pointer
    +ccflags-y += -Wmissing-prototypes
    +ccflags-y += -Wstrict-prototypes
    +else
    +ccflags-y += $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS)
    +PROGS_LDLIBS := $(KBUILD_HOSTLDLIBS)
    +endif

    >
    >>
    >> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
    >> ---
    >> samples/bpf/Makefile | 138 +++++++++++++++++++++++--------------------
    >> 1 file changed, 73 insertions(+), 65 deletions(-)
    >>
    >> diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
    >> index f5dbf3d0c5f3..625a71f2e9d2 100644
    >> --- a/samples/bpf/Makefile
    >> +++ b/samples/bpf/Makefile
    >> @@ -4,55 +4,53 @@ BPF_SAMPLES_PATH ?= $(abspath $(srctree)/$(src))
    >> TOOLS_PATH := $(BPF_SAMPLES_PATH)/../../tools
    >>
    >> # List of programs to build
    >> -hostprogs-y := test_lru_dist
    >> -hostprogs-y += sock_example
    >> -hostprogs-y += fds_example
    >> -hostprogs-y += sockex1
    >> -hostprogs-y += sockex2
    >> -hostprogs-y += sockex3
    >> -hostprogs-y += tracex1
    >> -hostprogs-y += tracex2
    >> -hostprogs-y += tracex3
    >> -hostprogs-y += tracex4
    >> -hostprogs-y += tracex5
    >> -hostprogs-y += tracex6
    >> -hostprogs-y += tracex7
    >> -hostprogs-y += test_probe_write_user
    >> -hostprogs-y += trace_output
    >> -hostprogs-y += lathist
    >> -hostprogs-y += offwaketime
    >> -hostprogs-y += spintest
    >> -hostprogs-y += map_perf_test
    >> -hostprogs-y += test_overhead
    >> -hostprogs-y += test_cgrp2_array_pin
    >> -hostprogs-y += test_cgrp2_attach
    >> -hostprogs-y += test_cgrp2_sock
    >> -hostprogs-y += test_cgrp2_sock2
    >> -hostprogs-y += xdp1
    >> -hostprogs-y += xdp2
    >> -hostprogs-y += xdp_router_ipv4
    >> -hostprogs-y += test_current_task_under_cgroup
    >> -hostprogs-y += trace_event
    >> -hostprogs-y += sampleip
    >> -hostprogs-y += tc_l2_redirect
    >> -hostprogs-y += lwt_len_hist
    >> -hostprogs-y += xdp_tx_iptunnel
    >> -hostprogs-y += test_map_in_map
    >> -hostprogs-y += per_socket_stats_example
    >> -hostprogs-y += xdp_redirect
    >> -hostprogs-y += xdp_redirect_map
    >> -hostprogs-y += xdp_redirect_cpu
    >> -hostprogs-y += xdp_monitor
    >> -hostprogs-y += xdp_rxq_info
    >> -hostprogs-y += syscall_tp
    >> -hostprogs-y += cpustat
    >> -hostprogs-y += xdp_adjust_tail
    >> -hostprogs-y += xdpsock
    >> -hostprogs-y += xdp_fwd
    >> -hostprogs-y += task_fd_query
    >> -hostprogs-y += xdp_sample_pkts
    >> -hostprogs-y += ibumad
    >> -hostprogs-y += hbm
    >> +progs-y := test_lru_dist
    >> +progs-y += sock_example
    >> +progs-y += fds_example
    >> +progs-y += sockex1
    >> +progs-y += sockex2
    >> +progs-y += sockex3
    >> +progs-y += tracex1
    >> +progs-y += tracex2
    >> +progs-y += tracex3
    >> +progs-y += tracex4
    >> +progs-y += tracex5
    >> +progs-y += tracex6
    >> +progs-y += tracex7
    >> +progs-y += test_probe_write_user
    >> +progs-y += trace_output
    >> +progs-y += lathist
    >> +progs-y += offwaketime
    >> +progs-y += spintest
    >> +progs-y += map_perf_test
    >> +progs-y += test_overhead
    >> +progs-y += test_cgrp2_array_pin
    >> +progs-y += test_cgrp2_attach
    >> +progs-y += test_cgrp2_sock
    >> +progs-y += test_cgrp2_sock2
    >> +progs-y += xdp1
    >> +progs-y += xdp2
    >> +progs-y += xdp_router_ipv4
    >> +progs-y += test_current_task_under_cgroup
    >> +progs-y += trace_event
    >> +progs-y += sampleip
    >> +progs-y += tc_l2_redirect
    >> +progs-y += lwt_len_hist
    >> +progs-y += xdp_tx_iptunnel
    >> +progs-y += test_map_in_map
    >> +progs-y += xdp_redirect_map
    >> +progs-y += xdp_redirect_cpu
    >> +progs-y += xdp_monitor
    >> +progs-y += xdp_rxq_info
    >> +progs-y += syscall_tp
    >> +progs-y += cpustat
    >> +progs-y += xdp_adjust_tail
    >> +progs-y += xdpsock
    >> +progs-y += xdp_fwd
    >> +progs-y += task_fd_query
    >> +progs-y += xdp_sample_pkts
    >> +progs-y += ibumad
    >> +progs-y += hbm
    >>
    >> # Libbpf dependencies
    >> LIBBPF = $(TOOLS_PATH)/lib/bpf/libbpf.a
    >> @@ -111,7 +109,7 @@ ibumad-objs := bpf_load.o ibumad_user.o $(TRACE_HELPERS)
    >> hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS)
    >>
    >> # Tell kbuild to always build the programs
    >> -always := $(hostprogs-y)
    >> +always := $(progs-y)
    >> always += sockex1_kern.o
    >> always += sockex2_kern.o
    >> always += sockex3_kern.o
    >> @@ -170,21 +168,6 @@ always += ibumad_kern.o
    >> always += hbm_out_kern.o
    >> always += hbm_edt_kern.o
    >>
    >> -KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include
    >> -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/bpf/
    >> -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/testing/selftests/bpf/
    >> -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/ -I$(srctree)/tools/include
    >> -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/perf
    >> -
    >> -HOSTCFLAGS_bpf_load.o += -Wno-unused-variable
    >> -
    >> -KBUILD_HOSTLDLIBS += $(LIBBPF) -lelf
    >> -HOSTLDLIBS_tracex4 += -lrt
    >> -HOSTLDLIBS_trace_output += -lrt
    >> -HOSTLDLIBS_map_perf_test += -lrt
    >> -HOSTLDLIBS_test_overhead += -lrt
    >> -HOSTLDLIBS_xdpsock += -pthread
    >> -
    >> # Strip all expet -D options needed to handle linux headers
    >> # for arm it's __LINUX_ARM_ARCH__ and potentially others fork vars
    >> D_OPTIONS = $(shell echo "$(KBUILD_CFLAGS) " | sed 's/[[:blank:]]/\n/g' | \
    >> @@ -194,6 +177,29 @@ ifeq ($(ARCH), arm)
    >> CLANG_EXTRA_CFLAGS := $(D_OPTIONS)
    >> endif
    >>
    >> +ccflags-y += -I$(objtree)/usr/include
    >> +ccflags-y += -I$(srctree)/tools/lib/bpf/
    >> +ccflags-y += -I$(srctree)/tools/testing/selftests/bpf/
    >> +ccflags-y += -I$(srctree)/tools/lib/
    >> +ccflags-y += -I$(srctree)/tools/include
    >> +ccflags-y += -I$(srctree)/tools/perf
    >> +ccflags-y += $(D_OPTIONS)
    >> +ccflags-y += -Wall
    >> +ccflags-y += -fomit-frame-pointer
    >> +ccflags-y += -Wmissing-prototypes
    >> +ccflags-y += -Wstrict-prototypes
    >> +
    >> +PROGS_CFLAGS := $(ccflags-y)
    >> +
    >> +PROGCFLAGS_bpf_load.o += -Wno-unused-variable
    >> +
    >> +PROGS_LDLIBS := $(LIBBPF) -lelf
    >> +PROGLDLIBS_tracex4 += -lrt
    >> +PROGLDLIBS_trace_output += -lrt
    >> +PROGLDLIBS_map_perf_test += -lrt
    >> +PROGLDLIBS_test_overhead += -lrt
    >> +PROGLDLIBS_xdpsock += -pthread
    >> +
    >> # Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline:
    >> # make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang
    >> LLC ?= llc
    >> @@ -284,6 +290,8 @@ $(obj)/hbm_out_kern.o: $(src)/hbm.h $(src)/hbm_kern.h
    >> $(obj)/hbm.o: $(src)/hbm.h
    >> $(obj)/hbm_edt_kern.o: $(src)/hbm.h $(src)/hbm_kern.h
    >>
    >> +-include $(BPF_SAMPLES_PATH)/Makefile.prog
    >> +
    >> # asm/sysreg.h - inline assembly used by it is incompatible with llvm.
    >> # But, there is no easy way to fix it, so just exclude it since it is
    >> # useless for BPF samples.
    >>

    --
    Regards,
    Ivan Khoronzhuk

    \
     
     \ /
      Last update: 2019-09-14 00:27    [W:4.283 / U:0.732 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site