lkml.org 
[lkml]   [2019]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] mm: Add callback for defining compaction completion
Date
On Thu, 2019-09-12 at 17:11 +0530, Bharath Vedartham wrote:
> Hi Nitin,
> On Wed, Sep 11, 2019 at 10:33:39PM +0000, Nitin Gupta wrote:
> > On Wed, 2019-09-11 at 08:45 +0200, Michal Hocko wrote:
> > > On Tue 10-09-19 22:27:53, Nitin Gupta wrote:
> > > [...]
> > > > > On Tue 10-09-19 13:07:32, Nitin Gupta wrote:
> > > > > > For some applications we need to allocate almost all memory as
> > > > > > hugepages.
> > > > > > However, on a running system, higher order allocations can fail if
> > > > > > the
> > > > > > memory is fragmented. Linux kernel currently does on-demand
> > > > > > compaction
> > > > > > as we request more hugepages but this style of compaction incurs
> > > > > > very
> > > > > > high latency. Experiments with one-time full memory compaction
> > > > > > (followed by hugepage allocations) shows that kernel is able to
> > > > > > restore a highly fragmented memory state to a fairly compacted
> > > > > > memory
> > > > > > state within <1 sec for a 32G system. Such data suggests that a
> > > > > > more
> > > > > > proactive compaction can help us allocate a large fraction of
> > > > > > memory
> > > > > > as hugepages keeping allocation latencies low.
> > > > > >
> > > > > > In general, compaction can introduce unexpected latencies for
> > > > > > applications that don't even have strong requirements for
> > > > > > contiguous
> > > > > > allocations.
> > >
> > > Could you expand on this a bit please? Gfp flags allow to express how
> > > much the allocator try and compact for a high order allocations. Hugetlb
> > > allocations tend to require retrying and heavy compaction to succeed and
> > > the success rate tends to be pretty high from my experience. Why that
> > > is not case in your case?
> > >
> The link to the driver you send on gitlab is not working :(

Sorry about that, here's the correct link:
https://gitlab.com/nigupta/linux/snippets/1894161

> > Yes, I have the same observation: with `GFP_TRANSHUGE |
> > __GFP_RETRY_MAYFAIL` I get very good success rate (~90% of free RAM
> > allocated as hugepages). However, what I'm trying to point out is that
> > this
> > high success rate comes with high allocation latencies (90th percentile
> > latency of 2206us). On the same system, the same high-order allocations
> > which hit the fast path have latency <5us.
> >
> > > > > > It is also hard to efficiently determine if the current
> > > > > > system state can be easily compacted due to mixing of unmovable
> > > > > > memory. Due to these reasons, automatic background compaction by
> > > > > > the
> > > > > > kernel itself is hard to get right in a way which does not hurt
> > > > > > unsuspecting
> > > > > applications or waste CPU cycles.
> > > > >
> > > > > We do trigger background compaction on a high order pressure from
> > > > > the
> > > > > page allocator by waking up kcompactd. Why is that not sufficient?
> > > > >
> > > >
> > > > Whenever kcompactd is woken up, it does just enough work to create
> > > > one free page of the given order (compaction_control.order) or higher.
> > >
> > > This is an implementation detail IMHO. I am pretty sure we can do a
> > > better auto tuning when there is an indication of a constant flow of
> > > high order requests. This is no different from the memory reclaim in
> > > principle. Just because the kswapd autotuning not fitting with your
> > > particular workload you wouldn't want to export direct reclaim
> > > functionality and call it from a random module. That is just doomed to
> > > fail because different subsystems in control just leads to decisions
> > > going against each other.
> > >
> >
> > I don't want to go the route of adding any auto-tuning/perdiction code to
> > control compaction in the kernel. I'm more inclined towards extending
> > existing interfaces to allow compaction behavior to be controlled either
> > from userspace or a kernel driver. Letting a random module control
> > compaction or a root process pumping new tunables from sysfs is the same
> > in
> > principle.
> Do you think a kernel module and root user process have the same
> privileges? You can only export so much info to sysfs to use? Also
> wouldn't this introduce more tunables, per driver tunables to be more
> specific?

- sysfs is a narrow interface to kernel functions. Not much different
from a narrow interface I'm exporting, to be used directly by drivers
which can themselves export sysfs/debugfs nodes.
- There are no per driver tunables here.


> > This patch is in the spirit of simple extension to existing
> > compaction_zone_order() which allows either a kernel driver or userspace
> > (through sysfs) to control compaction.
> >
> > Also, we should avoid driving hard parallels between reclaim and
> > compaction: the former is often necessary for forward progress while the
> > latter is often an optimization. Since contiguous allocations are mostly
> > optimizations it's good to expose hooks from the kernel that let user
> > (through a driver or userspace) control it using its own heuristics.
> How is compaction an optimization? If I have a memory zone which has
> memory pages more than zone_highwmark and if higher order allocations a
> re failing because the memory is awfully fragmented, We need compaction
> to furthur progress here. I have seen workloads where kswapd won't help
> in progressing furthur because memory is so awfully fragmented.
> The workload I am quoting is the thpscale_workload from Mel Gorman's mmtests
> workloads.

- You can usually (but not always) fallback to base pages in case higher-order
alloc fails. Higher order allocs are for reducing TLB pressure and for devices
that cannot handle non-contiguous physical regions.
- kswapd is for memory reclaim only and cannot help with fragmentation.
- THP itself is an optimization and can be turned off.

> > I thought hard about whats lacking in current userspace interface (sysfs):
> > - /proc/sys/vm/compact_memory: full system compaction is not an option as
> > a viable pro-active compaction strategy.
> Don't we have a sysfs interface to compact memory per node through
> /sys/devices/system/node/node<node_number>/compact? CONFIG_SYSFS AND
> CONFIG_NUMA are enabled on a lot of systems? Why are we not talking
> about this?
> I don't think kcompactd can go finer grain than per node. per-zone is
> an option but then that would be overkill I feel.

I want pro-active compaction to somewhat hide higher-order allocation
latencies. Even full node compaction is too coase for this purpose.
The goal is to keep fragmentation in check i.e, within certain thresholds.


> > - possibly expose [low, high] threshold values for each node and let
> > kcompactd act on them. This was my approach for my original patch I
> > linked earlier. Problem here is that it introduces too many tunables.
> >
> > Considering the above, I came up with this callback approach which make it
> > trivial to introduce user specific policies for compaction. It puts the
> > onus of system stability, responsive in the hands of user without
> > burdening
> > admins with more tunables or adding crystal balls to kernel.
> I have the same question as Michal, that is won't this cause conflicts
> among different subsystems? If you did answer it in your previous
> mails, could you point to as I may have missed it :)

There is no big harm if multiple drivers call compact_zone_order().
A reasonable driver would want to call this interface to compact memory
to a certain extent and under specific conditions. If another driver
call it in parallel then other driver would simply see a well compacted
state and back-off. It's also not hard for a driver to see if compaction
is not helping much, where it can again back-off.


> > > > Such a design causes very high latency for workloads where we want
> > > > to allocate lots of hugepages in short period of time. With pro-active
> > > > compaction we can hide much of this latency. For some more background
> > > > discussion and data, please see this thread:
> > > >
> > > > https://patchwork.kernel.org/patch/11098289/
> > >
> > > I am aware of that thread. And there are two things. You claim the
> > > allocation success rate is unnecessarily lower and that the direct
> > > latency is high. You simply cannot assume both low latency and high
> > > success rate. Compaction is not free. Somebody has to do the work.
> > > Hiding it into the background means that you are eating a lot of cycles
> > > from everybody else (think of a workload running in a restricted cpu
> > > controller just doing a lot of work in an unaccounted context).
> > >
> > > That being said you really have to be prepared to pay a price for
> > > precious resource like high order pages.
> > >
> > > On the other hand I do understand that high latency is not really
> > > desired for a more optimistic allocation requests with a reasonable
> > > fallback strategy. Those would benefit from kcompactd not giving up too
> > > early.
> >
> > Doing pro-active compaction in background has merits in reducing reducing
> > high-order alloc latency. Its true that it would end up burning cycles
> > with
> > little benefit in some cases. Its upto the user of this new interface to
> > back off if it detects such a case.
> Are these cycles worth considering in the big picture of reducing high
> order allocation latency?

Yes, I think it's worth it.


> > >
> > > > > > Even with these caveats, pro-active compaction can still be very
> > > > > > useful in certain scenarios to reduce hugepage allocation
> > > > > > latencies.
> > > > > > This callback interface allows drivers to drive compaction based
> > > > > > on
> > > > > > their own policies like the current level of external
> > > > > > fragmentation
> > > > > > for a particular order, system load etc.
> > > > >
> > > > > So we do not trust the core MM to make a reasonable decision while
> > > > > we
> > > > > give
> > > > > a free ticket to modules. How does this make any sense at all? How
> > > > > is a
> > > > > random module going to make a more informed decision when it has
> > > > > less
> > > > > visibility on the overal MM situation.
> > > > >
> > > >
> > > > Embedding any specific policy (like: keep external fragmentation for
> > > > order-9
> > > > between 30-40%) within MM core looks like a bad idea.
> > >
> > > Agreed
> > >
> > > > As a driver, we
> > > > can easily measure parameters like system load, current fragmentation
> > > > level
> > > > for any order in any zone etc. to make an informed decision.
> > > > See the thread I refereed above for more background discussion.
> > >
> > > Do that from the userspace then. If there is an insufficient interface
> > > to do that then let's talk about what is missing.
> > >
> >
> > Currently we only have a proc interface to do full system compaction.
> > Here's what missing from this interface: ability to set per-node, per-
> > zone,
> > per-order, [low, high] extfrag thresholds. This is what I exposed in my
> > earlier patch titled 'proactive compaction'. Discussion there made me
> > realize
> > these are too many tunables and any admin would always get them wrong.
> > Even
> > if intended user of these sysfs node is some monitoring daemon, its
> > tempting to mess with them.
> >
> > With a callback extension to compact_zone_order() implementing any of the
> > per-node, per-zone, per-order limits is straightforward and if needed the
> > driver can expose debugfs/sysfs nodes if needed at all. (nvcompact.c
> > driver[1] exposes these tunables as debugfs nodes, for example).
> >
> > [1] https://gitlab.com/nigupta/linux/snippets/1894161
> Now, your proposing a system where we have interfaces from each driver.
> That could be more confusing for a sys admin to configure I feel?
>
> But what your proposing really made me think about what kind
> of tunables do we want? Rather than just talking about tunables from the
> mm subsystem, can we introduce tunables that indicate the behaviour of
> workloads? Using this information from the user, we can look to optimize
> reclaim and compaction for that workload.
> If we have a tunable which can indicate that the kernel is running in an
> environment where the where the workload will be performing a lot of
> higher order allocations, we can improve memory reclaim and compaction
> considering these parameters. One optimization I can think of extending
> kcompactd to compact more memory when a higher order allocation fails.
>
> One of the biggest issues with having a discussion on proactive
> reclaim/compaction is that the workloads are really unpredictable.
> Rather than working on tunables from the mm subsystem which help us take
> action on memory pressure, can we talk about interfaces to hint about
> workloads so that we can make better informed decisions in the mm
> subsystem rather than involving other drivers?


I'm not adding any tunables, just exposing an interface.

-Nitin

\
 
 \ /
  Last update: 2019-09-12 19:19    [W:0.077 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site