lkml.org 
[lkml]   [2019]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] dt-bindings: display: Add documentation for innolux,p097pfg_ssd2858 panel
Date
This adds documentation for innolux,p097pfg panel with bridge chip
ssd2858.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../display/panel/innolux,p097pfg_ssd2858.txt | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt
new file mode 100644
index 000000000000..4ce55e889ad2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt
@@ -0,0 +1,39 @@
+SSD2858 bridge + Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p097pfg_ssd2858"
+- reg: DSI virtual channel of the peripheral
+- avdd-supply: phandle of the regulator that provides panel positive voltage
+- avee-supply: phandle of the regulator that provides panel negative voltage
+- pp1800-supply: phandle of the regulator that provides panel 1.8V IO power
+- pp3300-supply: phandle of the regulator that provides ssd2858 3.3V URAM power
+- pp1200-bridge-supply: phandle of the regulator that provides ssd2858 1.2V core power
+- vddio-bridge-supply: phandle of the regulator that provides ssd2858 1.8V IO power
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &dsi0 {
+ panel: panel@0 {
+ compatible = "innolux,p097pfg_ssd2858";
+ reg = <0>;
+ enable-gpios = <&pio 45 0 &pio 73 0>;
+ avdd-supply = <...>;
+ avee-supply = <...>;
+ pp1800-supply = <...>;
+ pp3300-supply = <...>;
+ pp1200-bridge-supply = <...>;
+ vddio-bridge-supply = <...>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+
+ };
--
2.21.0
\
 
 \ /
  Last update: 2019-09-12 11:05    [W:0.062 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site