lkml.org 
[lkml]   [2019]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 06/15] arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
Date
msm8916 uses sensors 0, 1, 2, 4 and 5. Sensor 3 is NOT used. Fixup the
device tree so that the correct sensor ID is used and as a result we can
actually check the temperature for the cpu2_3 sensor.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87..8686e101905c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -179,7 +179,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens 4>;
+ thermal-sensors = <&tsens 5>;

trips {
cpu0_1_alert0: trip-point@0 {
@@ -209,7 +209,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens 3>;
+ thermal-sensors = <&tsens 4>;

trips {
cpu2_3_alert0: trip-point@0 {
--
2.17.1
\
 
 \ /
  Last update: 2019-09-11 09:18    [W:0.079 / U:3.296 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site