lkml.org 
[lkml]   [2019]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 03/15] drivers: thermal: tsens: Add __func__ identifier to debug statements
Date
Printing the function name when enabling debugging makes logs easier to
read.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/qcom/tsens-common.c | 8 ++++----
drivers/thermal/qcom/tsens.c | 6 +++---
2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index c037bdf92c66..7437bfe196e5 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -42,8 +42,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,

for (i = 0; i < priv->num_sensors; i++) {
dev_dbg(priv->dev,
- "sensor%d - data_point1:%#x data_point2:%#x\n",
- i, p1[i], p2[i]);
+ "%s: sensor%d - data_point1:%#x data_point2:%#x\n",
+ __func__, i, p1[i], p2[i]);

priv->sensor[i].slope = SLOPE_DEFAULT;
if (mode == TWO_PT_CALIB) {
@@ -60,7 +60,7 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
(CAL_DEGC_PT1 *
priv->sensor[i].slope);
- dev_dbg(priv->dev, "offset:%d\n", priv->sensor[i].offset);
+ dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset);
}
}

@@ -209,7 +209,7 @@ int __init init_common(struct tsens_priv *priv)
if (ret)
goto err_put_device;
if (!enabled) {
- dev_err(dev, "tsens device is not enabled\n");
+ dev_err(dev, "%s: device not enabled\n", __func__);
ret = -ENODEV;
goto err_put_device;
}
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 542a7f8c3d96..06c6bbd69a1a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -127,7 +127,7 @@ static int tsens_probe(struct platform_device *pdev)
of_property_read_u32(np, "#qcom,sensors", &num_sensors);

if (num_sensors <= 0) {
- dev_err(dev, "invalid number of sensors\n");
+ dev_err(dev, "%s: invalid number of sensors\n", __func__);
return -EINVAL;
}

@@ -156,7 +156,7 @@ static int tsens_probe(struct platform_device *pdev)

ret = priv->ops->init(priv);
if (ret < 0) {
- dev_err(dev, "tsens init failed\n");
+ dev_err(dev, "%s: init failed\n", __func__);
return ret;
}

@@ -164,7 +164,7 @@ static int tsens_probe(struct platform_device *pdev)
ret = priv->ops->calibrate(priv);
if (ret < 0) {
if (ret != -EPROBE_DEFER)
- dev_err(dev, "tsens calibration failed\n");
+ dev_err(dev, "%s: calibration failed\n", __func__);
return ret;
}
}
--
2.17.1
\
 
 \ /
  Last update: 2019-09-11 09:17    [W:0.054 / U:13.036 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site