lkml.org 
[lkml]   [2019]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH] firmware: broadcom: add OP-TEE based BNXT f/w manager
Thanks for the review and  comments.

On Tue, Sep 10, 2019 at 10:46 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Tue, Sep 10, 2019 at 08:47:04PM +0530, Sheetal Tigadoli wrote:
> > From: Vikas Gupta <vikas.gupta@broadcom.com>
> >
> > This driver registers on TEE bus to interact with OP-TEE based
> > BNXT firmware management modules
> >
> > Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
> > Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
> > ---
> > drivers/firmware/broadcom/Kconfig | 8 +
> > drivers/firmware/broadcom/Makefile | 1 +
> > drivers/firmware/broadcom/tee_bnxt_fw.c | 447 ++++++++++++++++++++++++++
> > include/linux/firmware/broadcom/tee_bnxt_fw.h | 17 +
> > 4 files changed, 473 insertions(+)
> > create mode 100644 drivers/firmware/broadcom/tee_bnxt_fw.c
> > create mode 100644 include/linux/firmware/broadcom/tee_bnxt_fw.h
> >
> > diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig
> > index 6468082..a846a21 100644
> > --- a/drivers/firmware/broadcom/Kconfig
> > +++ b/drivers/firmware/broadcom/Kconfig
> > @@ -22,3 +22,11 @@ config BCM47XX_SPROM
> > In case of SoC devices SPROM content is stored on a flash used by
> > bootloader firmware CFE. This driver provides method to ssb and bcma
> > drivers to read SPROM on SoC.
> > +
> > +config TEE_BNXT_FW
> > + bool "Broadcom BNXT firmware manager"
> > + depends on ARCH_BCM_IPROC && OPTEE
>
> No ability to build with compile testing?
Will add "|| COMPILE_TEST"
>
> > + default ARCH_BCM_IPROC
> > + help
> > + This module help to manage firmware on Broadcom BNXT device. The module
> > + registers on tee bus and invoke calls to manage firmware on BNXT device.
> > diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile
> > index 72c7fdc..17c5061 100644
> > --- a/drivers/firmware/broadcom/Makefile
> > +++ b/drivers/firmware/broadcom/Makefile
> > @@ -1,3 +1,4 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
> > obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
> > +obj-$(CONFIG_TEE_BNXT_FW) += tee_bnxt_fw.o
> > diff --git a/drivers/firmware/broadcom/tee_bnxt_fw.c b/drivers/firmware/broadcom/tee_bnxt_fw.c
> > new file mode 100644
> > index 00000000..89a48fd
> > --- /dev/null
> > +++ b/drivers/firmware/broadcom/tee_bnxt_fw.c
> > @@ -0,0 +1,447 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2019 Broadcom.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/tee_drv.h>
> > +#include <linux/uuid.h>
> > +
> > +#include <linux/firmware/broadcom/tee_bnxt_fw.h>
> > +
> > +#define DRIVER_NAME "tee-bnxt-fw"

> KBUILD_MODNAME?
Will remove DRIVER_NAME macro and use KBUILD_MODNAME instead.
>
> > +#define MAX_SHM_MEM_SZ SZ_4M
>
> Why?
Limiting max data buffer size per request to optee to 4MB.
>
> > +
> > +#define MAX_TEE_PARAM_ARRY_MEMB 4
> > +
> > +enum ta_cmd {
> > +/*
> > + * TA_CMD_BNXT_FASTBOOT - boot bnxt device by copying f/w into sram
> > + *
> > + * param[0] unused
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_ITEM_NOT_FOUND - Corrupt f/w image found on memory
> > + */
> > + TA_CMD_BNXT_FASTBOOT = 0,
> > +
>
> Please indent the comments too. As-is this is hard to read.
Will do
>
>
> > +/*
> > + * TA_CMD_BNXT_HEALTH_STATUS - to check health of bnxt device
> > + *
> > + * param[0] (out value) - value.a: health status
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + */
> > + TA_CMD_BNXT_HEALTH_STATUS,
>
> Should all of these have explicit values?
Will initialize each cmd (TA_CMD_BNXT_*) explicitly
>
> > +
> > +/*
> > + * TA_CMD_BNXT_HANDSHAKE - to check bnxt device is booted
> > + *
> > + * param[0] (in value) - value.a: max timeout value
> > + * param[0] (out value) - value.a: boot status
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + */
> > + TA_CMD_BNXT_HANDSHAKE,
> > +
> > +/*
> > + * TA_CMD_BNXT_COPY_COREDUMP - copy the core dump into shm
> > + *
> > + * param[0] (in value) - value.a: offset at which data to be copied from
> > + * value.b: size of the data
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + * TEE_ERROR_ITEM_NOT_FOUND - Corrupt core dump
> > + */
> > + TA_CMD_BNXT_COPY_COREDUMP,
> > +
> > +/*
> > + * TA_CMD_BNXT_FW_UPGRADE - upgrade the bnxt firmware
> > + *
> > + * param[0] (in value) - value.a: size of the f/w image
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + */
> > + TA_CMD_BNXT_FW_UPGRADE,
> > +};
> > +
> > +/**
> > + * struct tee_bnxt_fw_private - OP-TEE bnxt private data
> > + * @dev: OP-TEE based bnxt device.
> > + * @ctx: OP-TEE context handler.
> > + * @session_id: TA session identifier.
> > + */
> > +struct tee_bnxt_fw_private {
> > + struct device *dev;
>
> Why is the pointer back needed?
the dev pointer is used in "dev_err()"
>
> > + struct tee_context *ctx;
> > + u32 session_id;
> > + struct tee_shm *fw_shm_pool;
> > +};
> > +
> > +static struct tee_bnxt_fw_private pvt_data;
> > +
> > +static inline void prepare_args(int cmd,
> > + struct tee_ioctl_invoke_arg *inv_arg,
> > + struct tee_param *param)
> > +{
> > + memset(inv_arg, 0, sizeof(*inv_arg));
> > + memset(param, 0, (MAX_TEE_PARAM_ARRY_MEMB * sizeof(*param)));
> > +
> > + inv_arg->func = cmd;
> > + inv_arg->session = pvt_data.session_id;
> > + inv_arg->num_params = MAX_TEE_PARAM_ARRY_MEMB;
> > +
> > + /* Fill invoke cmd params */
> > + switch (cmd) {
> > + case TA_CMD_BNXT_HEALTH_STATUS:
> > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> > + break;
> > + case TA_CMD_BNXT_HANDSHAKE:
> > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
> > + break;
> > + case TA_CMD_BNXT_COPY_COREDUMP:
> > + case TA_CMD_BNXT_FW_UPGRADE:
> > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> > + param[0].u.memref.shm = pvt_data.fw_shm_pool;
> > + param[0].u.memref.size = MAX_SHM_MEM_SZ;
> > + param[0].u.memref.shm_offs = 0;
> > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
> > + break;
> > + case TA_CMD_BNXT_FASTBOOT:
> > + default:
> > + /* Nothing to do */
> > + break;
> > + }
> > +}
> > +
> > +/**
> > + * tee_bnxt_fw_load() - Load the bnxt firmware
> > + * Uses an OP-TEE call to start a secure
> > + * boot process.
> > + * Returns 0 on success, negative errno otherwise.
> > + */
> > +int tee_bnxt_fw_load(void)
> > +{
> > + int ret = 0;
> > + struct tee_ioctl_invoke_arg inv_arg;
> > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> > +
> > + if (!pvt_data.ctx)
> > + return -ENODEV;
> > +
> > + prepare_args(TA_CMD_BNXT_FASTBOOT, &inv_arg, param);
> > +
> > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > + dev_err(pvt_data.dev, "TA_CMD_BNXT_LOAD invoke err: %x\n",
> > + (ret < 0) ? ret : inv_arg.ret);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(tee_bnxt_fw_load);
>
> Why are you exporting symbols for a single file? What uses these?
These apis will be used by bnxt driver, still working on open sourcing changes

> This feels really wrong, are you sure this all is correct?
>
> I stopped reading here :)
>
> thanks,
>
> greg k-h

\
 
 \ /
  Last update: 2019-09-11 19:53    [W:0.059 / U:1.640 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site