lkml.org 
[lkml]   [2019]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] USB: host: ohci-at91: completely shutdown the controller in at91_stop_hc()
Date
From: Boris Krasnovskiy <Boris.Krasnovskiy@lairdconnect.com>

When removing the ohci-at91 module, the fact of not running complete shutdown
of all the ports was keeping additional analog cells consuming power for no
reason.
Doing Reset (OHCI_HCR) to HcCommandStatus register is the way to go, but using
the OHCI controller shutdown procedure is just perfect for this.

Signed-off-by: Boris Krasnovskiy <Boris.Krasnovskiy@lairdconnect.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/usb/host/ohci-at91.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index fc35a7993b7b..cb63bcd5049a 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -123,7 +123,7 @@ static void at91_stop_hc(struct platform_device *pdev)
/*
* Put the USB host controller into reset.
*/
- writel(0, &regs->control);
+ usb_hcd_platform_shutdown(pdev);

/*
* Stop the USB clocks.
--
2.17.1
\
 
 \ /
  Last update: 2019-09-11 08:43    [W:0.042 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site