lkml.org 
[lkml]   [2019]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] net: stmmac: implement support for passive mode converters via dt
From
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
Date: Fri, 6 Sep 2019 16:02:55 +0300

> In-between the MAC & PHY there can be a mode converter, which converts one
> mode to another (e.g. GMII-to-RGMII).
>
> The converter, can be passive (i.e. no driver or OS/SW information
> required), so the MAC & PHY need to be configured differently.
>
> For the `stmmac` driver, this is implemented via a `mac-mode` property in
> the device-tree, which configures the MAC into a certain mode, and for the
> PHY a `phy_interface` field will hold the mode of the PHY. The mode of the
> PHY will be passed to the PHY and from there-on it work in a different
> mode. If unspecified, the default `phy-mode` will be used for both.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Applied to net-next.

\
 
 \ /
  Last update: 2019-09-11 16:29    [W:0.035 / U:30.788 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site