lkml.org 
[lkml]   [2019]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] crypto: sun4i-ss: simplify enable/disable of the device
Date
This patch regroups resource enabling/disabling in dedicated function.
This simplify error handling and will permit to support power
management.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
drivers/crypto/sunxi-ss/sun4i-ss-core.c | 73 ++++++++++++++-----------
1 file changed, 42 insertions(+), 31 deletions(-)

diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
index 9aa6fe081a27..2c9ff01dddfc 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
@@ -223,6 +223,41 @@ static struct sun4i_ss_alg_template ss_algs[] = {
#endif
};

+static void sun4i_ss_disable(struct sun4i_ss_ctx *ss)
+{
+ if (ss->reset)
+ reset_control_assert(ss->reset);
+ clk_disable_unprepare(ss->ssclk);
+ clk_disable_unprepare(ss->busclk);
+}
+
+static int sun4i_ss_enable(struct sun4i_ss_ctx *ss)
+{
+ int err;
+
+ err = clk_prepare_enable(ss->busclk);
+ if (err) {
+ dev_err(ss->dev, "Cannot prepare_enable busclk\n");
+ goto err_enable;
+ }
+ err = clk_prepare_enable(ss->ssclk);
+ if (err) {
+ dev_err(ss->dev, "Cannot prepare_enable ssclk\n");
+ goto err_enable;
+ }
+ if (ss->reset) {
+ err = reset_control_deassert(ss->reset);
+ if (err) {
+ dev_err(ss->dev, "Cannot deassert reset control\n");
+ goto err_enable;
+ }
+ }
+ return err;
+err_enable:
+ sun4i_ss_disable(ss);
+ return err;
+}
+
static int sun4i_ss_probe(struct platform_device *pdev)
{
u32 v;
@@ -269,17 +304,9 @@ static int sun4i_ss_probe(struct platform_device *pdev)
ss->reset = NULL;
}

- /* Enable both clocks */
- err = clk_prepare_enable(ss->busclk);
- if (err) {
- dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
- return err;
- }
- err = clk_prepare_enable(ss->ssclk);
- if (err) {
- dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
- goto error_ssclk;
- }
+ err = sun4i_ss_enable(ss);
+ if (err)
+ goto error_enable;

/*
* Check that clock have the correct rates given in the datasheet
@@ -288,16 +315,7 @@ static int sun4i_ss_probe(struct platform_device *pdev)
err = clk_set_rate(ss->ssclk, cr_mod);
if (err) {
dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
- goto error_clk;
- }
-
- /* Deassert reset if we have a reset control */
- if (ss->reset) {
- err = reset_control_deassert(ss->reset);
- if (err) {
- dev_err(&pdev->dev, "Cannot deassert reset control\n");
- goto error_clk;
- }
+ goto error_enable;
}

/*
@@ -387,12 +405,8 @@ static int sun4i_ss_probe(struct platform_device *pdev)
break;
}
}
- if (ss->reset)
- reset_control_assert(ss->reset);
-error_clk:
- clk_disable_unprepare(ss->ssclk);
-error_ssclk:
- clk_disable_unprepare(ss->busclk);
+error_enable:
+ sun4i_ss_disable(ss);
return err;
}

@@ -416,10 +430,7 @@ static int sun4i_ss_remove(struct platform_device *pdev)
}

writel(0, ss->base + SS_CTL);
- if (ss->reset)
- reset_control_assert(ss->reset);
- clk_disable_unprepare(ss->busclk);
- clk_disable_unprepare(ss->ssclk);
+ sun4i_ss_disable(ss);
return 0;
}

--
2.21.0
\
 
 \ /
  Last update: 2019-09-11 13:47    [W:0.035 / U:0.300 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site