lkml.org 
[lkml]   [2019]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] dmaengine: bindings/edma: dma-channel-mask to array
Date
Hi,

Changes since v1:
- Extend the common dma-channel-mask to uint32-array to be usable for
controllers with more than 32 channels
- Use the dma-channel-mask instead custom property for available channels for
EDMA.

The original patch was part of the EDMA multicore usage series.

Rob: I'm not sure if I got the dma-common.yaml update correctly...

EDMAs can have 32 or 64 channels depending on the SoC, the dma-channel-mask
needs to be an array to be usable for the driver.

Regards,
Peter
---
Peter Ujfalusi (3):
dt-bindings: dmaengine: dma-common: Change dma-channel-mask to
uint32-array
dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA
dmaengine: ti: edma: Add support for handling reserved channels

.../devicetree/bindings/dma/dma-common.yaml | 10 +++-
.../devicetree/bindings/dma/ti-edma.txt | 6 ++
drivers/dma/ti/edma.c | 59 +++++++++++++++++--
3 files changed, 68 insertions(+), 7 deletions(-)

--
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-09-10 13:47    [W:0.077 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site