lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 06/16] watchdog: remove w90x900 driver
On Fri, Aug 09, 2019 at 10:27:34PM +0200, Arnd Bergmann wrote:
> The ARM w90x900 platform is getting removed, so this driver is obsolete
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
> .../watchdog/watchdog-parameters.rst | 10 -
> drivers/watchdog/Kconfig | 9 -
> drivers/watchdog/Makefile | 1 -
> drivers/watchdog/nuc900_wdt.c | 302 ------------------
> 4 files changed, 322 deletions(-)
> delete mode 100644 drivers/watchdog/nuc900_wdt.c
>
> diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
> index 226aba56f704..223c99361a30 100644
> --- a/Documentation/watchdog/watchdog-parameters.rst
> +++ b/Documentation/watchdog/watchdog-parameters.rst
> @@ -366,16 +366,6 @@ nic7018_wdt:
>
> -------------------------------------------------
>
> -nuc900_wdt:
> - heartbeat:
> - Watchdog heartbeats in seconds.
> - (default = 15)
> - nowayout:
> - Watchdog cannot be stopped once started
> - (default=kernel config parameter)
> -
> --------------------------------------------------
> -
> omap_wdt:
> timer_margin:
> initial watchdog timeout (in seconds)
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index e631f1ae303a..0e64f501ef30 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -655,15 +655,6 @@ config STMP3XXX_RTC_WATCHDOG
> To compile this driver as a module, choose M here: the
> module will be called stmp3xxx_rtc_wdt.
>
> -config NUC900_WATCHDOG
> - tristate "Nuvoton NUC900 watchdog"
> - depends on ARCH_W90X900 || COMPILE_TEST
> - help
> - Say Y here if to include support for the watchdog timer
> - for the Nuvoton NUC900 series SoCs.
> - To compile this driver as a module, choose M here: the
> - module will be called nuc900_wdt.
> -
> config TS4800_WATCHDOG
> tristate "TS-4800 Watchdog"
> depends on HAS_IOMEM && OF
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 85f55ec76f8d..b5a0aed537af 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -63,7 +63,6 @@ obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
> obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
> obj-$(CONFIG_NPCM7XX_WATCHDOG) += npcm_wdt.o
> obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
> -obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
> obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
> obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
> obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
> diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c
> deleted file mode 100644
> index db124cebe838..000000000000
> --- a/drivers/watchdog/nuc900_wdt.c
> +++ /dev/null
> @@ -1,302 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (c) 2009 Nuvoton technology corporation.
> - *
> - * Wan ZongShun <mcuos.com@gmail.com>
> - */
> -
> -#include <linux/bitops.h>
> -#include <linux/errno.h>
> -#include <linux/fs.h>
> -#include <linux/io.h>
> -#include <linux/clk.h>
> -#include <linux/kernel.h>
> -#include <linux/miscdevice.h>
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/interrupt.h>
> -#include <linux/types.h>
> -#include <linux/watchdog.h>
> -#include <linux/uaccess.h>
> -
> -#define REG_WTCR 0x1c
> -#define WTCLK (0x01 << 10)
> -#define WTE (0x01 << 7) /*wdt enable*/
> -#define WTIS (0x03 << 4)
> -#define WTIF (0x01 << 3)
> -#define WTRF (0x01 << 2)
> -#define WTRE (0x01 << 1)
> -#define WTR (0x01 << 0)
> -/*
> - * The watchdog time interval can be calculated via following formula:
> - * WTIS real time interval (formula)
> - * 0x00 ((2^ 14 ) * ((external crystal freq) / 256))seconds
> - * 0x01 ((2^ 16 ) * ((external crystal freq) / 256))seconds
> - * 0x02 ((2^ 18 ) * ((external crystal freq) / 256))seconds
> - * 0x03 ((2^ 20 ) * ((external crystal freq) / 256))seconds
> - *
> - * The external crystal freq is 15Mhz in the nuc900 evaluation board.
> - * So 0x00 = +-0.28 seconds, 0x01 = +-1.12 seconds, 0x02 = +-4.48 seconds,
> - * 0x03 = +- 16.92 seconds..
> - */
> -#define WDT_HW_TIMEOUT 0x02
> -#define WDT_TIMEOUT (HZ/2)
> -#define WDT_HEARTBEAT 15
> -
> -static int heartbeat = WDT_HEARTBEAT;
> -module_param(heartbeat, int, 0);
> -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
> - "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
> -
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
> - "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> -
> -struct nuc900_wdt {
> - struct clk *wdt_clock;
> - struct platform_device *pdev;
> - void __iomem *wdt_base;
> - char expect_close;
> - struct timer_list timer;
> - spinlock_t wdt_lock;
> - unsigned long next_heartbeat;
> -};
> -
> -static unsigned long nuc900wdt_busy;
> -static struct nuc900_wdt *nuc900_wdt;
> -
> -static inline void nuc900_wdt_keepalive(void)
> -{
> - unsigned int val;
> -
> - spin_lock(&nuc900_wdt->wdt_lock);
> -
> - val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
> - val |= (WTR | WTIF);
> - __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
> -
> - spin_unlock(&nuc900_wdt->wdt_lock);
> -}
> -
> -static inline void nuc900_wdt_start(void)
> -{
> - unsigned int val;
> -
> - spin_lock(&nuc900_wdt->wdt_lock);
> -
> - val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
> - val |= (WTRE | WTE | WTR | WTCLK | WTIF);
> - val &= ~WTIS;
> - val |= (WDT_HW_TIMEOUT << 0x04);
> - __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
> -
> - spin_unlock(&nuc900_wdt->wdt_lock);
> -
> - nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
> - mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
> -}
> -
> -static inline void nuc900_wdt_stop(void)
> -{
> - unsigned int val;
> -
> - del_timer(&nuc900_wdt->timer);
> -
> - spin_lock(&nuc900_wdt->wdt_lock);
> -
> - val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
> - val &= ~WTE;
> - __raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
> -
> - spin_unlock(&nuc900_wdt->wdt_lock);
> -}
> -
> -static inline void nuc900_wdt_ping(void)
> -{
> - nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
> -}
> -
> -static int nuc900_wdt_open(struct inode *inode, struct file *file)
> -{
> -
> - if (test_and_set_bit(0, &nuc900wdt_busy))
> - return -EBUSY;
> -
> - nuc900_wdt_start();
> -
> - return stream_open(inode, file);
> -}
> -
> -static int nuc900_wdt_close(struct inode *inode, struct file *file)
> -{
> - if (nuc900_wdt->expect_close == 42)
> - nuc900_wdt_stop();
> - else {
> - dev_crit(&nuc900_wdt->pdev->dev,
> - "Unexpected close, not stopping watchdog!\n");
> - nuc900_wdt_ping();
> - }
> -
> - nuc900_wdt->expect_close = 0;
> - clear_bit(0, &nuc900wdt_busy);
> - return 0;
> -}
> -
> -static const struct watchdog_info nuc900_wdt_info = {
> - .identity = "nuc900 watchdog",
> - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> - WDIOF_MAGICCLOSE,
> -};
> -
> -static long nuc900_wdt_ioctl(struct file *file,
> - unsigned int cmd, unsigned long arg)
> -{
> - void __user *argp = (void __user *)arg;
> - int __user *p = argp;
> - int new_value;
> -
> - switch (cmd) {
> - case WDIOC_GETSUPPORT:
> - return copy_to_user(argp, &nuc900_wdt_info,
> - sizeof(nuc900_wdt_info)) ? -EFAULT : 0;
> - case WDIOC_GETSTATUS:
> - case WDIOC_GETBOOTSTATUS:
> - return put_user(0, p);
> -
> - case WDIOC_KEEPALIVE:
> - nuc900_wdt_ping();
> - return 0;
> -
> - case WDIOC_SETTIMEOUT:
> - if (get_user(new_value, p))
> - return -EFAULT;
> -
> - heartbeat = new_value;
> - nuc900_wdt_ping();
> -
> - return put_user(new_value, p);
> - case WDIOC_GETTIMEOUT:
> - return put_user(heartbeat, p);
> - default:
> - return -ENOTTY;
> - }
> -}
> -
> -static ssize_t nuc900_wdt_write(struct file *file, const char __user *data,
> - size_t len, loff_t *ppos)
> -{
> - if (!len)
> - return 0;
> -
> - /* Scan for magic character */
> - if (!nowayout) {
> - size_t i;
> -
> - nuc900_wdt->expect_close = 0;
> -
> - for (i = 0; i < len; i++) {
> - char c;
> - if (get_user(c, data + i))
> - return -EFAULT;
> - if (c == 'V') {
> - nuc900_wdt->expect_close = 42;
> - break;
> - }
> - }
> - }
> -
> - nuc900_wdt_ping();
> - return len;
> -}
> -
> -static void nuc900_wdt_timer_ping(struct timer_list *unused)
> -{
> - if (time_before(jiffies, nuc900_wdt->next_heartbeat)) {
> - nuc900_wdt_keepalive();
> - mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
> - } else
> - dev_warn(&nuc900_wdt->pdev->dev, "Will reset the machine !\n");
> -}
> -
> -static const struct file_operations nuc900wdt_fops = {
> - .owner = THIS_MODULE,
> - .llseek = no_llseek,
> - .unlocked_ioctl = nuc900_wdt_ioctl,
> - .open = nuc900_wdt_open,
> - .release = nuc900_wdt_close,
> - .write = nuc900_wdt_write,
> -};
> -
> -static struct miscdevice nuc900wdt_miscdev = {
> - .minor = WATCHDOG_MINOR,
> - .name = "watchdog",
> - .fops = &nuc900wdt_fops,
> -};
> -
> -static int nuc900wdt_probe(struct platform_device *pdev)
> -{
> - int ret = 0;
> -
> - nuc900_wdt = devm_kzalloc(&pdev->dev, sizeof(*nuc900_wdt),
> - GFP_KERNEL);
> - if (!nuc900_wdt)
> - return -ENOMEM;
> -
> - nuc900_wdt->pdev = pdev;
> -
> - spin_lock_init(&nuc900_wdt->wdt_lock);
> -
> - nuc900_wdt->wdt_base = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(nuc900_wdt->wdt_base))
> - return PTR_ERR(nuc900_wdt->wdt_base);
> -
> - nuc900_wdt->wdt_clock = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(nuc900_wdt->wdt_clock)) {
> - dev_err(&pdev->dev, "failed to find watchdog clock source\n");
> - return PTR_ERR(nuc900_wdt->wdt_clock);
> - }
> -
> - clk_enable(nuc900_wdt->wdt_clock);
> -
> - timer_setup(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0);
> -
> - ret = misc_register(&nuc900wdt_miscdev);
> - if (ret) {
> - dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n",
> - WATCHDOG_MINOR, ret);
> - goto err_clk;
> - }
> -
> - return 0;
> -
> -err_clk:
> - clk_disable(nuc900_wdt->wdt_clock);
> - return ret;
> -}
> -
> -static int nuc900wdt_remove(struct platform_device *pdev)
> -{
> - misc_deregister(&nuc900wdt_miscdev);
> -
> - clk_disable(nuc900_wdt->wdt_clock);
> -
> - return 0;
> -}
> -
> -static struct platform_driver nuc900wdt_driver = {
> - .probe = nuc900wdt_probe,
> - .remove = nuc900wdt_remove,
> - .driver = {
> - .name = "nuc900-wdt",
> - },
> -};
> -
> -module_platform_driver(nuc900wdt_driver);
> -
> -MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
> -MODULE_DESCRIPTION("Watchdog driver for NUC900");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:nuc900-wdt");
> --
> 2.20.0
>

\
 
 \ /
  Last update: 2019-08-09 22:44    [W:0.226 / U:2.980 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site