lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] Input: add support for polling to input devices
Separating "normal" and "polled" input devices was a mistake, as often we
want to allow the very same device work on both interrupt-driven and
polled mode, depending on the board on which the device is used.

This introduces new APIs:

- input_setup_polling
- input_set_poll_interval
- input_set_min_poll_interval
- input_set_max_poll_interval

These new APIs allow switching an input device into polled mode with sysfs
attributes matching drivers using input_polled_dev APIs that will be
eventually removed.

Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/Makefile | 2 +-
drivers/input/input-poller.c | 208 +++++++++++++++++++++++++++++++++++
drivers/input/input-poller.h | 18 +++
drivers/input/input.c | 36 ++++--
include/linux/input.h | 12 ++
5 files changed, 268 insertions(+), 8 deletions(-)

diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 40de6a7be641..e35650930371 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -6,7 +6,7 @@
# Each configuration option enables a list of files.

obj-$(CONFIG_INPUT) += input-core.o
-input-core-y := input.o input-compat.o input-mt.o ff-core.o
+input-core-y := input.o input-compat.o input-mt.o input-poller.o ff-core.o

obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o
obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o
diff --git a/drivers/input/input-poller.c b/drivers/input/input-poller.c
new file mode 100644
index 000000000000..e041adb04f5a
--- /dev/null
+++ b/drivers/input/input-poller.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for polling mode for input devices.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include "input-poller.h"
+
+struct input_dev_poller {
+ void (*poll)(struct input_dev *dev);
+
+ unsigned int poll_interval; /* msec */
+ unsigned int poll_interval_max; /* msec */
+ unsigned int poll_interval_min; /* msec */
+
+ struct input_dev *input;
+ struct delayed_work work;
+};
+
+static void input_dev_poller_queue_work(struct input_dev_poller *poller)
+{
+ unsigned long delay;
+
+ delay = msecs_to_jiffies(poller->poll_interval);
+ if (delay >= HZ)
+ delay = round_jiffies_relative(delay);
+
+ queue_delayed_work(system_freezable_wq, &poller->work, delay);
+}
+
+static void input_dev_poller_work(struct work_struct *work)
+{
+ struct input_dev_poller *poller =
+ container_of(work, struct input_dev_poller, work.work);
+
+ poller->poll(poller->input);
+ input_dev_poller_queue_work(poller);
+}
+
+void input_dev_poller_finalize(struct input_dev_poller *poller)
+{
+ if (!poller->poll_interval)
+ poller->poll_interval = 500;
+ if (!poller->poll_interval_max)
+ poller->poll_interval_max = poller->poll_interval;
+}
+
+void input_dev_poller_start(struct input_dev_poller *poller)
+{
+ /* Only start polling if polling is enabled */
+ if (poller->poll_interval > 0) {
+ poller->poll(poller->input);
+ input_dev_poller_queue_work(poller);
+ }
+}
+
+void input_dev_poller_stop(struct input_dev_poller *poller)
+{
+ cancel_delayed_work_sync(&poller->work);
+}
+
+int input_setup_polling(struct input_dev *dev,
+ void (*poll_fn)(struct input_dev *dev))
+{
+ struct input_dev_poller *poller;
+
+ poller = kzalloc(sizeof(*poller), GFP_KERNEL);
+ if (!poller) {
+ dev_err(dev->dev.parent ?: &dev->dev,
+ "%s: unable to allocate poller structure\n", __func__);
+ return -ENOMEM;
+ }
+
+ INIT_DELAYED_WORK(&poller->work, input_dev_poller_work);
+ poller->input = dev;
+ poller->poll = poll_fn;
+
+ dev->poller = poller;
+ return 0;
+}
+EXPORT_SYMBOL(input_setup_polling);
+
+static bool input_dev_ensure_poller(struct input_dev *dev)
+{
+ if (!dev->poller) {
+ dev_err(dev->dev.parent ?: &dev->dev,
+ "poller structure has not been set up\n");
+ return false;
+ }
+
+ return true;
+}
+
+void input_set_poll_interval(struct input_dev *dev, unsigned int interval)
+{
+ if (input_dev_ensure_poller(dev))
+ dev->poller->poll_interval = interval;
+}
+EXPORT_SYMBOL(input_set_poll_interval);
+
+void input_set_min_poll_interval(struct input_dev *dev, unsigned int interval)
+{
+ if (input_dev_ensure_poller(dev))
+ dev->poller->poll_interval_min = interval;
+}
+EXPORT_SYMBOL(input_set_min_poll_interval);
+
+void input_set_max_poll_interval(struct input_dev *dev, unsigned int interval)
+{
+ if (input_dev_ensure_poller(dev))
+ dev->poller->poll_interval_max = interval;
+}
+EXPORT_SYMBOL(input_set_max_poll_interval);
+
+/* SYSFS interface */
+
+static ssize_t input_dev_get_poll_interval(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct input_dev *input = to_input_dev(dev);
+
+ return sprintf(buf, "%d\n", input->poller->poll_interval);
+}
+
+static ssize_t input_dev_set_poll_interval(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct input_dev *input = to_input_dev(dev);
+ struct input_dev_poller *poller = input->poller;
+ unsigned int interval;
+ int err;
+
+ err = kstrtouint(buf, 0, &interval);
+ if (err)
+ return err;
+
+ if (interval < poller->poll_interval_min)
+ return -EINVAL;
+
+ if (interval > poller->poll_interval_max)
+ return -EINVAL;
+
+ mutex_lock(&input->mutex);
+
+ poller->poll_interval = interval;
+
+ if (input->users) {
+ cancel_delayed_work_sync(&poller->work);
+ if (poller->poll_interval > 0)
+ input_dev_poller_queue_work(poller);
+ }
+
+ mutex_unlock(&input->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(poll, S_IRUGO | S_IWUSR,
+ input_dev_get_poll_interval, input_dev_set_poll_interval);
+
+static ssize_t input_dev_get_poll_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct input_dev *input = to_input_dev(dev);
+
+ return sprintf(buf, "%d\n", input->poller->poll_interval_max);
+}
+
+static DEVICE_ATTR(max, S_IRUGO, input_dev_get_poll_max, NULL);
+
+static ssize_t input_dev_get_poll_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct input_dev *input = to_input_dev(dev);
+
+ return sprintf(buf, "%d\n", input->poller->poll_interval_min);
+}
+
+static DEVICE_ATTR(min, S_IRUGO, input_dev_get_poll_min, NULL);
+
+static umode_t input_poller_attrs_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct input_dev *input = to_input_dev(dev);
+
+ return input->poller ? attr->mode : 0;
+}
+
+static struct attribute *input_poller_attrs[] = {
+ &dev_attr_poll.attr,
+ &dev_attr_max.attr,
+ &dev_attr_min.attr,
+ NULL
+};
+
+struct attribute_group input_poller_attribute_group = {
+ .is_visible = input_poller_attrs_visible,
+ .attrs = input_poller_attrs,
+};
diff --git a/drivers/input/input-poller.h b/drivers/input/input-poller.h
new file mode 100644
index 000000000000..e3fca0be1d32
--- /dev/null
+++ b/drivers/input/input-poller.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _INPUT_POLLER_H
+#define _INPUT_POLLER_H
+
+/*
+ * Support for polling mode for input devices.
+ */
+#include <linux/sysfs.h>
+
+struct input_dev_poller;
+
+void input_dev_poller_finalize(struct input_dev_poller *poller);
+void input_dev_poller_start(struct input_dev_poller *poller);
+void input_dev_poller_stop(struct input_dev_poller *poller);
+
+extern struct attribute_group input_poller_attribute_group;
+
+#endif /* _INPUT_POLLER_H */
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 7494a0dede79..c08aa3596144 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -24,6 +24,7 @@
#include <linux/mutex.h>
#include <linux/rcupdate.h>
#include "input-compat.h"
+#include "input-poller.h"

MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("Input core");
@@ -603,20 +604,31 @@ int input_open_device(struct input_handle *handle)

handle->open++;

- if (!dev->users++ && dev->open)
- retval = dev->open(dev);
+ if (dev->users++) {
+ /*
+ * Device is already opened, so we can exit immediately and
+ * report success.
+ */
+ goto out;
+ }

- if (retval) {
- dev->users--;
- if (!--handle->open) {
+ if (dev->open) {
+ retval = dev->open(dev);
+ if (retval) {
+ dev->users--;
+ handle->open--;
/*
* Make sure we are not delivering any more events
* through this handle
*/
synchronize_rcu();
+ goto out;
}
}

+ if (dev->poller)
+ input_dev_poller_start(dev->poller);
+
out:
mutex_unlock(&dev->mutex);
return retval;
@@ -655,8 +667,13 @@ void input_close_device(struct input_handle *handle)

__input_release_device(handle);

- if (!--dev->users && dev->close)
- dev->close(dev);
+ if (!--dev->users) {
+ if (dev->poller)
+ input_dev_poller_stop(dev->poller);
+
+ if (dev->close)
+ dev->close(dev);
+ }

if (!--handle->open) {
/*
@@ -1502,6 +1519,7 @@ static const struct attribute_group *input_dev_attr_groups[] = {
&input_dev_attr_group,
&input_dev_id_attr_group,
&input_dev_caps_attr_group,
+ &input_poller_attribute_group,
NULL
};

@@ -1511,6 +1529,7 @@ static void input_dev_release(struct device *device)

input_ff_destroy(dev);
input_mt_destroy_slots(dev);
+ kfree(dev->poller);
kfree(dev->absinfo);
kfree(dev->vals);
kfree(dev);
@@ -2175,6 +2194,9 @@ int input_register_device(struct input_dev *dev)
if (!dev->setkeycode)
dev->setkeycode = input_default_setkeycode;

+ if (dev->poller)
+ input_dev_poller_finalize(dev->poller);
+
error = device_add(&dev->dev);
if (error)
goto err_free_vals;
diff --git a/include/linux/input.h b/include/linux/input.h
index e95a439d8bd5..94f277cd806a 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -21,6 +21,8 @@
#include <linux/timer.h>
#include <linux/mod_devicetable.h>

+struct input_dev_poller;
+
/**
* struct input_value - input value representation
* @type: type of value (EV_KEY, EV_ABS, etc)
@@ -71,6 +73,8 @@ enum input_clock_type {
* not sleep
* @ff: force feedback structure associated with the device if device
* supports force feedback effects
+ * @poller: poller structure associated with the device if device is
+ * set up to use polling mode
* @repeat_key: stores key code of the last key pressed; used to implement
* software autorepeat
* @timer: timer for software autorepeat
@@ -156,6 +160,8 @@ struct input_dev {

struct ff_device *ff;

+ struct input_dev_poller *poller;
+
unsigned int repeat_key;
struct timer_list timer;

@@ -372,6 +378,12 @@ void input_unregister_device(struct input_dev *);

void input_reset_device(struct input_dev *);

+int input_setup_polling(struct input_dev *dev,
+ void (*poll_fn)(struct input_dev *dev));
+void input_set_poll_interval(struct input_dev *dev, unsigned int interval);
+void input_set_min_poll_interval(struct input_dev *dev, unsigned int interval);
+void input_set_max_poll_interval(struct input_dev *dev, unsigned int interval);
+
int __must_check input_register_handler(struct input_handler *);
void input_unregister_handler(struct input_handler *);

--
2.23.0.rc1.153.gdeed80330f-goog

--
Dmitry

\
 
 \ /
  Last update: 2019-08-09 19:36    [W:0.086 / U:1.772 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site