lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] ARM: iop32x: make mach/uncompress.h independent of mach/hardware.h
Date
All supported uarts use the same address: IQ80321_UART and IQ31244_UART
are both defined to the default value of 0xfe800000. By using that as
the address unconditionally, all dependencies on other machine headers
can be avoided.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-iop32x/include/mach/uncompress.h | 18 ++----------------
1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
index ed4ac3e28fa1..c8548875d942 100644
--- a/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -6,9 +6,8 @@
#include <asm/types.h>
#include <asm/mach-types.h>
#include <linux/serial_reg.h>
-#include <mach/hardware.h>

-volatile u8 *uart_base;
+#define uart_base ((volatile u8 *)0xfe800000)

#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)

@@ -23,17 +22,4 @@ static inline void flush(void)
{
}

-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
- if (machine_is_iq80321())
- uart_base = (volatile u8 *)IQ80321_UART;
- else if (machine_is_iq31244() || machine_is_em7210())
- uart_base = (volatile u8 *)IQ31244_UART;
- else
- uart_base = (volatile u8 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+#define arch_decomp_setup() do { } while (0)
--
2.20.0
\
 
 \ /
  Last update: 2019-08-09 18:36    [W:0.176 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site