lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-sunxi] [PATCH v8 4/4] arm64: dts: allwinner: orange-pi-3: Enable HDMI output
On Fri, Aug 09, 2019 at 10:25:32AM +0200, Code Kipper wrote:
> On Tue, 6 Aug 2019 at 17:57, <megous@megous.com> wrote:
> >
> > From: Ondrej Jirman <megous@megous.com>
> >
> > Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC
> > I2C bus voltage shifter. Before EDID can be read, we need to pull PH2 high.
> > This is realized by the ddc-en-gpios property.
> Great work. Is there any chance you can move this to the
> arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi?, as all the H6
> based orange-pi's have this feature.

I plan to do that as a followup patch, once this is merged.

regards,
o.

> BR,
> CK
> >
> > Signed-off-by: Ondrej Jirman <megous@megous.com>
> > ---
> > .../dts/allwinner/sun50i-h6-orangepi-3.dts | 26 +++++++++++++++++++
> > 1 file changed, 26 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> > index 2c6807b74ff6..01bb1bafe284 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
> > @@ -22,6 +22,18 @@
> > stdout-path = "serial0:115200n8";
> > };
> >
> > + connector {
> > + compatible = "hdmi-connector";
> > + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> > + type = "a";
> > +
> > + port {
> > + hdmi_con_in: endpoint {
> > + remote-endpoint = <&hdmi_out_con>;
> > + };
> > + };
> > + };
> > +
> > leds {
> > compatible = "gpio-leds";
> >
> > @@ -72,6 +84,10 @@
> > cpu-supply = <&reg_dcdca>;
> > };
> >
> > +&de {
> > + status = "okay";
> > +};
> > +
> > &ehci0 {
> > status = "okay";
> > };
> > @@ -91,6 +107,16 @@
> > status = "okay";
> > };
> >
> > +&hdmi {
> > + status = "okay";
> > +};
> > +
> > +&hdmi_out {
> > + hdmi_out_con: endpoint {
> > + remote-endpoint = <&hdmi_con_in>;
> > + };
> > +};
> > +
> > &mdio {
> > ext_rgmii_phy: ethernet-phy@1 {
> > compatible = "ethernet-phy-ieee802.3-c22";
> > --
> > 2.22.0
> >
> > --
> > You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190806155744.10263-5-megous%40megous.com.

\
 
 \ /
  Last update: 2019-08-09 11:10    [W:0.047 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site