lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] PCI: PM: Also move to D0 before calling pci_legacy_resume_early()
On Thu, Aug 08, 2019 at 06:46:51PM +0000, Dexuan Cui wrote:
>
> In pci_legacy_suspend_late(), the device state is moved to PCI_UNKNOWN.
> In pci_pm_thaw_noirq(), the state is supposed to be moved back to PCI_D0,
> but the current code misses the pci_legacy_resume_early() path, so the
> state remains in PCI_UNKNOWN in that path, and during hiberantion this
> causes an error for the Mellanox VF driver, which fails to enable
> MSI-X: pci_msi_supported() is false due to dev->current_state != PCI_D0:

s/hiberantion/hibernation/

Actually, it sounds more like "during *resume*, this causes an error",
so maybe you want s/hiberantion/resume/ instead?

> mlx4_core a6d1:00:02.0: Detected virtual function - running in slave mode
> mlx4_core a6d1:00:02.0: Sending reset
> mlx4_core a6d1:00:02.0: Sending vhcr0
> mlx4_core a6d1:00:02.0: HCA minimum page size:512
> mlx4_core a6d1:00:02.0: Timestamping is not supported in slave mode
> mlx4_core a6d1:00:02.0: INTx is not supported in multi-function mode, aborting
> PM: dpm_run_callback(): pci_pm_thaw+0x0/0xd7 returns -95
> PM: Device a6d1:00:02.0 failed to thaw: error -95
>
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> ---
> drivers/pci/pci-driver.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index 36dbe960306b..27dfc68db9e7 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -1074,15 +1074,16 @@ static int pci_pm_thaw_noirq(struct device *dev)
> return error;
> }
>
> - if (pci_has_legacy_pm_support(pci_dev))
> - return pci_legacy_resume_early(dev);
> -
> /*
> * pci_restore_state() requires the device to be in D0 (because of MSI
> * restoration among other things), so force it into D0 in case the
> * driver's "freeze" callbacks put it into a low-power state directly.
> */
> pci_set_power_state(pci_dev, PCI_D0);
> +
> + if (pci_has_legacy_pm_support(pci_dev))
> + return pci_legacy_resume_early(dev);
> +
> pci_restore_state(pci_dev);
>
> if (drv && drv->pm && drv->pm->thaw_noirq)
> --
> 2.19.1
>

\
 
 \ /
  Last update: 2019-08-08 21:20    [W:0.049 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site