lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 45/45] spi: bcm2835: Fix 3-wire mode if DMA is enabled
Date
From: Lukas Wunner <lukas@wunner.de>

commit 8d8bef50365847134b51c1ec46786bc2873e4e47 upstream.

Commit 6935224da248 ("spi: bcm2835: enable support of 3-wire mode")
added 3-wire support to the BCM2835 SPI driver by setting the REN bit
(Read Enable) in the CS register when receiving data. The REN bit puts
the transmitter in high-impedance state. The driver recognizes that
data is to be received by checking whether the rx_buf of a transfer is
non-NULL.

Commit 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers
meeting certain conditions") subsequently broke 3-wire support because
it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace
rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is
*always* non-NULL if DMA is enabled.

Reinstate 3-wire support by not only checking whether rx_buf is non-NULL,
but also checking that it is not the dummy buffer.

Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions")
Reported-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.2+
Cc: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/spi/spi-bcm2835.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -554,7 +554,8 @@ static int bcm2835_spi_transfer_one(stru
bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);

/* handle all the 3-wire mode */
- if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))
+ if (spi->mode & SPI_3WIRE && tfr->rx_buf &&
+ tfr->rx_buf != master->dummy_rx)
cs |= BCM2835_SPI_CS_REN;
else
cs &= ~BCM2835_SPI_CS_REN;

\
 
 \ /
  Last update: 2019-08-08 21:13    [W:1.273 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site