lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] clk: samsung: exynos5800: Move MAU subsystem clocks to MAU sub-CMU
Date
This patch fixes broken sound on Exynos5422/5800 platforms after
system/suspend resume cycle in cases where the audio root clock
is derived from MAU_EPLL_CLK.

In order to preserve state of the USER_MUX_MAU_EPLL_CLK clock mux
during system suspend/resume cycle for Exynos5800 we group the MAU
block input clocks in "MAU" sub-CMU and add the clock mux control
bit to .suspend_regs. This ensures that user configuration of the mux
is not lost after the PMU block changes the mux setting to OSC_DIV
when switching off the MAU power domain.

Adding the SRC_TOP9 register to exynos5800_clk_regs[] array is not
sufficient as at the time of the syscore_ops suspend call MAU power
domain is already turned off and we already save and subsequently
restore an incorrect register's value.

Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver")
Reported-by: Jaafar Ali <jaafarkhalaf@gmail.com>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Jaafar Ali <jaafarkhalaf@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v1:
- added comment to the exynos5800_mau_suspend_regs[] array entry
---
drivers/clk/samsung/clk-exynos5420.c | 54 ++++++++++++++++++++++------
1 file changed, 43 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index fdb17c799aa5..2d18e1ae25d7 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -534,8 +534,6 @@ static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = {
GATE_BUS_TOP, 24, 0, 0),
GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0),
- GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
- SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
};

static const struct samsung_mux_clock exynos5420_mux_clks[] __initconst = {
@@ -577,8 +575,13 @@ static const struct samsung_div_clock exynos5420_div_clks[] __initconst = {

static const struct samsung_gate_clock exynos5420_gate_clks[] __initconst = {
GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
+ /* Maudio Block */
GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
+ GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
+ GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
};

static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
@@ -1017,12 +1020,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
GATE(CLK_SCLK_DP1, "sclk_dp1", "dout_dp1",
GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),

- /* Maudio Block */
- GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
- GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
- GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
-
/* FSYS Block */
GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
@@ -1281,6 +1278,20 @@ static struct exynos5_subcmu_reg_dump exynos5x_mfc_suspend_regs[] = {
{ DIV4_RATIO, 0, 0x3 }, /* DIV dout_mfc_blk */
};

+
+static const struct samsung_gate_clock exynos5800_mau_gate_clks[] __initconst = {
+ GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
+ SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
+ GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
+ GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
+};
+
+static struct exynos5_subcmu_reg_dump exynos5800_mau_suspend_regs[] = {
+ { SRC_TOP9, 0, BIT(8) }, /* MUX mout_user_mau_epll */
+};
+
static const struct exynos5_subcmu_info exynos5x_disp_subcmu = {
.div_clks = exynos5x_disp_div_clks,
.nr_div_clks = ARRAY_SIZE(exynos5x_disp_div_clks),
@@ -1311,12 +1322,27 @@ static const struct exynos5_subcmu_info exynos5x_mfc_subcmu = {
.pd_name = "MFC",
};

+static const struct exynos5_subcmu_info exynos5800_mau_subcmu = {
+ .gate_clks = exynos5800_mau_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(exynos5800_mau_gate_clks),
+ .suspend_regs = exynos5800_mau_suspend_regs,
+ .nr_suspend_regs = ARRAY_SIZE(exynos5800_mau_suspend_regs),
+ .pd_name = "MAU",
+};
+
static const struct exynos5_subcmu_info *exynos5x_subcmus[] = {
&exynos5x_disp_subcmu,
&exynos5x_gsc_subcmu,
&exynos5x_mfc_subcmu,
};

+static const struct exynos5_subcmu_info *exynos5800_subcmus[] = {
+ &exynos5x_disp_subcmu,
+ &exynos5x_gsc_subcmu,
+ &exynos5x_mfc_subcmu,
+ &exynos5800_mau_subcmu,
+};
+
static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __initconst = {
PLL_35XX_RATE(24 * MHZ, 2000000000, 250, 3, 0),
PLL_35XX_RATE(24 * MHZ, 1900000000, 475, 6, 0),
@@ -1547,11 +1573,17 @@ static void __init exynos5x_clk_init(struct device_node *np,
samsung_clk_extended_sleep_init(reg_base,
exynos5x_clk_regs, ARRAY_SIZE(exynos5x_clk_regs),
exynos5420_set_clksrc, ARRAY_SIZE(exynos5420_set_clksrc));
- if (soc == EXYNOS5800)
+
+ if (soc == EXYNOS5800) {
samsung_clk_sleep_init(reg_base, exynos5800_clk_regs,
ARRAY_SIZE(exynos5800_clk_regs));
- exynos5_subcmus_init(ctx, ARRAY_SIZE(exynos5x_subcmus),
- exynos5x_subcmus);
+
+ exynos5_subcmus_init(ctx, ARRAY_SIZE(exynos5800_subcmus),
+ exynos5800_subcmus);
+ } else {
+ exynos5_subcmus_init(ctx, ARRAY_SIZE(exynos5x_subcmus),
+ exynos5x_subcmus);
+ }

samsung_clk_of_add_provider(np, ctx);
}
--
2.17.1
\
 
 \ /
  Last update: 2019-08-08 16:50    [W:0.067 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site