lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] vfio-mdev/mtty: Simplify interrupt generation
Date
While generating interrupt, mdev_state is already available for which
interrupt is generated.
Instead of doing indirect way from state->device->uuid-> to searching
state linearly in linked list on every interrupt generation,
directly use the available state.

Hence, simplify the code to use mdev_state and remove unused helper
function with that.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
---
samples/vfio-mdev/mtty.c | 39 ++++++++-------------------------------
1 file changed, 8 insertions(+), 31 deletions(-)

diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c
index 92e770a06ea2..ce84a300a4da 100644
--- a/samples/vfio-mdev/mtty.c
+++ b/samples/vfio-mdev/mtty.c
@@ -152,20 +152,9 @@ static const struct file_operations vd_fops = {

/* function prototypes */

-static int mtty_trigger_interrupt(const guid_t *uuid);
+static int mtty_trigger_interrupt(struct mdev_state *mdev_state);

/* Helper functions */
-static struct mdev_state *find_mdev_state_by_uuid(const guid_t *uuid)
-{
- struct mdev_state *mds;
-
- list_for_each_entry(mds, &mdev_devices_list, next) {
- if (guid_equal(mdev_uuid(mds->mdev), uuid))
- return mds;
- }
-
- return NULL;
-}

static void dump_buffer(u8 *buf, uint32_t count)
{
@@ -337,8 +326,7 @@ static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
pr_err("Serial port %d: Fifo level trigger\n",
index);
#endif
- mtty_trigger_interrupt(
- mdev_uuid(mdev_state->mdev));
+ mtty_trigger_interrupt(mdev_state);
}
} else {
#if defined(DEBUG_INTR)
@@ -352,8 +340,7 @@ static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
*/
if (mdev_state->s[index].uart_reg[UART_IER] &
UART_IER_RLSI)
- mtty_trigger_interrupt(
- mdev_uuid(mdev_state->mdev));
+ mtty_trigger_interrupt(mdev_state);
}
mutex_unlock(&mdev_state->rxtx_lock);
break;
@@ -372,8 +359,7 @@ static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
pr_err("Serial port %d: IER_THRI write\n",
index);
#endif
- mtty_trigger_interrupt(
- mdev_uuid(mdev_state->mdev));
+ mtty_trigger_interrupt(mdev_state);
}

mutex_unlock(&mdev_state->rxtx_lock);
@@ -444,7 +430,7 @@ static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
#if defined(DEBUG_INTR)
pr_err("Serial port %d: MCR_OUT2 write\n", index);
#endif
- mtty_trigger_interrupt(mdev_uuid(mdev_state->mdev));
+ mtty_trigger_interrupt(mdev_state);
}

if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) &&
@@ -452,7 +438,7 @@ static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state,
#if defined(DEBUG_INTR)
pr_err("Serial port %d: MCR RTS/DTR write\n", index);
#endif
- mtty_trigger_interrupt(mdev_uuid(mdev_state->mdev));
+ mtty_trigger_interrupt(mdev_state);
}
break;

@@ -503,8 +489,7 @@ static void handle_bar_read(unsigned int index, struct mdev_state *mdev_state,
#endif
if (mdev_state->s[index].uart_reg[UART_IER] &
UART_IER_THRI)
- mtty_trigger_interrupt(
- mdev_uuid(mdev_state->mdev));
+ mtty_trigger_interrupt(mdev_state);
}
mutex_unlock(&mdev_state->rxtx_lock);

@@ -1028,17 +1013,9 @@ static int mtty_set_irqs(struct mdev_device *mdev, uint32_t flags,
return ret;
}

-static int mtty_trigger_interrupt(const guid_t *uuid)
+static int mtty_trigger_interrupt(struct mdev_state *mdev_state)
{
int ret = -1;
- struct mdev_state *mdev_state;
-
- mdev_state = find_mdev_state_by_uuid(uuid);
-
- if (!mdev_state) {
- pr_info("%s: mdev not found\n", __func__);
- return -EINVAL;
- }

if ((mdev_state->irq_index == VFIO_PCI_MSI_IRQ_INDEX) &&
(!mdev_state->msi_evtfd))
--
2.21.0.777.g83232e3864
\
 
 \ /
  Last update: 2019-08-08 16:14    [W:0.190 / U:3.844 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site