lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
Date
This patch adds the evaluation variant of the model A of the PineH64.
The model A has the same size of the pine64 and has a PCIE slot.

The only devicetree difference with current pineH64, is the PHY
regulator.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../sun50i-h6-pine-h64-modelA-eval.dts | 26 +++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index f6db0611cb85..9a02166cbf72 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
new file mode 100644
index 000000000000..d8ff02747efe
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@gmail.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+ model = "Pine H64 model A evaluation board";
+ compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+};
+
+&emac {
+ phy-supply = <&reg_gmac_3v3>;
+};
--
2.21.0
\
 
 \ /
  Last update: 2019-08-08 10:43    [W:0.301 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site