lkml.org 
[lkml]   [2019]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 1/2] dt-bindings: net: macb: Add new property for PS SGMII only
Hi Andrew,

On Mon, Aug 5, 2019 at 7:00 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> On Mon, Aug 05, 2019 at 11:45:05AM +0530, Harini Katakam wrote:
> > Hi Andrew,
> >
> > On Sun, Aug 4, 2019 at 8:26 PM Andrew Lunn <andrew@lunn.ch> wrote:
> > >
> > > On Wed, Jul 31, 2019 at 03:10:32PM +0530, Harini Katakam wrote:
> > > > Add a new property to indicate when PS SGMII is used with NO
> > > > external PHY on board.
> > >
> > > Hi Harini
> > >
> > > What exactly is you use case? Are you connecting to a Ethernet switch?
> > > To an SFP cage with a copper module?
> >
> > Yes, an SFP cage is the common HW target for this patch.
>
> Hi Harini
>
> So you have a copper PHY in the SFP cage. It will talk SGMII
> signalling to your PS SGMII. When that signalling is complete i would
> expect the MAC to raise an interrupt, just as if the SGMII PHY was
> soldered on the board. So i don't see why you need this polling?
>

Thanks. Sorry, I overlooked this interrupt. Let me try that.

Regards,
Harini

\
 
 \ /
  Last update: 2019-08-05 16:38    [W:0.115 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site