lkml.org 
[lkml]   [2019]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: net: meson-dwmac: convert to yaml
Date
Now that we have the DT validation in place, let's convert the device tree
bindings for the Synopsys DWMAC Glue for Amlogic SoCs over to a YAML schemas.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Rob,

I keep getting :
.../devicetree/bindings/net/amlogic,meson-dwmac.example.dt.yaml: ethernet@c9410000: reg: [[3376480256, 65536], [3364046144, 8]] is too long

for the example DT

and for the board DT :
../amlogic/meson-gxl-s905x-libretech-cc.dt.yaml: ethernet@c9410000: reg: [[0, 3376480256, 0, 65536, 0, 3364046144, 0, 4]] is too short
../amlogic/meson-gxl-s905x-nexbox-a95x.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too long

and I don't know how to get rid of it.

What should I do for reg ?

Neil

.../bindings/net/amlogic,meson-dwmac.yaml | 113 ++++++++++++++++++
.../devicetree/bindings/net/meson-dwmac.txt | 71 -----------
.../devicetree/bindings/net/snps,dwmac.yaml | 5 +
3 files changed, 118 insertions(+), 71 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
delete mode 100644 Documentation/devicetree/bindings/net/meson-dwmac.txt

diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
new file mode 100644
index 000000000000..ae91aa9d8616
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson DWMAC Ethernet controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson6-dwmac
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: GMAC main clock
+ - description: First parent clock of the internal mux
+ - description: Second parent clock of the internal mux
+
+ clock-names:
+ minItems: 3
+ maxItems: 3
+ items:
+ - const: stmmaceth
+ - const: clkin0
+ - const: clkin1
+
+ amlogic,tx-delay-ns:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The internal RGMII TX clock delay (provided by this driver) in
+ nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.
+ When phy-mode is set to "rgmii" then the TX delay should be
+ explicitly configured. When not configured a fallback of 2ns is
+ used. When the phy-mode is set to either "rgmii-id" or "rgmii-txid"
+ the TX clock delay is already provided by the PHY. In that case
+ this property should be set to 0ns (which disables the TX clock
+ delay in the MAC to prevent the clock from going off because both
+ PHY and MAC are adding a delay).
+ Any configuration is ignored when the phy-mode is set to "rmii".
+
+properties:
+ compatible:
+ additionalItems: true
+ maxItems: 3
+ items:
+ - enum:
+ - amlogic,meson6-dwmac
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
+ contains:
+ enum:
+ - snps,dwmac-3.70a
+ - snps,dwmac
+
+ reg:
+ items:
+ - description:
+ The first register range should be the one of the DWMAC controller
+ - description:
+ The second range is is for the Amlogic specific configuration
+ (for example the PRG_ETHERNET register range on Meson8b and newer)
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - phy-mode
+
+examples:
+ - |
+ ethmac: ethernet@c9410000 {
+ compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
+ interrupts = <8>;
+ interrupt-names = "macirq";
+ clocks = <&clk_eth>, <&clkc_fclk_div2>, <&clk_mpll2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ phy-mode = "rgmii";
+ };
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt
deleted file mode 100644
index 1321bb194ed9..000000000000
--- a/Documentation/devicetree/bindings/net/meson-dwmac.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-* Amlogic Meson DWMAC Ethernet controller
-
-The device inherits all the properties of the dwmac/stmmac devices
-described in the file stmmac.txt in the current directory with the
-following changes.
-
-Required properties on all platforms:
-
-- compatible: Depending on the platform this should be one of:
- - "amlogic,meson6-dwmac"
- - "amlogic,meson8b-dwmac"
- - "amlogic,meson8m2-dwmac"
- - "amlogic,meson-gxbb-dwmac"
- - "amlogic,meson-axg-dwmac"
- Additionally "snps,dwmac" and any applicable more
- detailed version number described in net/stmmac.txt
- should be used.
-
-- reg: The first register range should be the one of the DWMAC
- controller. The second range is is for the Amlogic specific
- configuration (for example the PRG_ETHERNET register range
- on Meson8b and newer)
-
-Required properties on Meson8b, Meson8m2, GXBB and newer:
-- clock-names: Should contain the following:
- - "stmmaceth" - see stmmac.txt
- - "clkin0" - first parent clock of the internal mux
- - "clkin1" - second parent clock of the internal mux
-
-Optional properties on Meson8b, Meson8m2, GXBB and newer:
-- amlogic,tx-delay-ns: The internal RGMII TX clock delay (provided
- by this driver) in nanoseconds. Allowed values
- are: 0ns, 2ns, 4ns, 6ns.
- When phy-mode is set to "rgmii" then the TX
- delay should be explicitly configured. When
- not configured a fallback of 2ns is used.
- When the phy-mode is set to either "rgmii-id"
- or "rgmii-txid" the TX clock delay is already
- provided by the PHY. In that case this
- property should be set to 0ns (which disables
- the TX clock delay in the MAC to prevent the
- clock from going off because both PHY and MAC
- are adding a delay).
- Any configuration is ignored when the phy-mode
- is set to "rmii".
-
-Example for Meson6:
-
- ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson6-dwmac", "snps,dwmac";
- reg = <0xc9410000 0x10000
- 0xc1108108 0x4>;
- interrupts = <0 8 1>;
- interrupt-names = "macirq";
- clocks = <&clk81>;
- clock-names = "stmmaceth";
- }
-
-Example for GXBB:
- ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
- reg = <0x0 0xc9410000 0x0 0x10000>,
- <0x0 0xc8834540 0x0 0x8>;
- interrupts = <0 8 1>;
- interrupt-names = "macirq";
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
- phy-mode = "rgmii";
- };
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 76fea2be66ac..ff1dc662a4e3 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -50,6 +50,11 @@ properties:
- allwinner,sun8i-r40-emac
- allwinner,sun8i-v3s-emac
- allwinner,sun50i-a64-emac
+ - amlogic,meson6-dwmac
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
- snps,dwmac
- snps,dwmac-3.50a
- snps,dwmac-3.610
--
2.22.0
\
 
 \ /
  Last update: 2019-08-05 14:29    [W:0.048 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site