lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH 0/5] Add bluetooth support for Orange Pi 3
From
Date
Hi Maxime,

>>> (Resend to add missing lists, sorry for the noise.)
>>>
>>> This series implements bluetooth support for Xunlong Orange Pi 3 board.
>>>
>>> The board uses AP6256 WiFi/BT 5.0 chip.
>>>
>>> Summary of changes:
>>>
>>> - add more delay to let initialize the chip
>>> - let the kernel detect firmware file path
>>> - add new compatible and update dt-bindings
>>> - update Orange Pi 3 / H6 DTS
>>>
>>> Please take a look.
>>>
>>> thank you and regards,
>>> Ondrej Jirman
>>>
>>> Ondrej Jirman (5):
>>> dt-bindings: net: Add compatible for BCM4345C5 bluetooth device
>>> bluetooth: bcm: Add support for loading firmware for BCM4345C5
>>> bluetooth: hci_bcm: Give more time to come out of reset
>>> arm64: dts: allwinner: h6: Add pin configs for uart1
>>> arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
>>>
>>> .../bindings/net/broadcom-bluetooth.txt | 1 +
>>> .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++
>>> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
>>> drivers/bluetooth/btbcm.c | 3 +++
>>> drivers/bluetooth/hci_bcm.c | 3 ++-
>>> 5 files changed, 35 insertions(+), 1 deletion(-)
>>
>> all 5 patches have been applied to bluetooth-next tree.
>
> The DTS patches (last 2) should go through the arm-soc tree, can you
> drop them?

why is that? We have included DTS changes for Bluetooth devices directly all the time. What is different with this hardware?

Regards

Marcel

\
 
 \ /
  Last update: 2019-08-30 14:44    [W:0.055 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site