lkml.org 
[lkml]   [2019]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[1/2] dt-bindings: rtc: pcf85263/pcf85363: add some properties
Date
Add some properties for pcf85263/pcf85363 as follows:
- interrupt-output-pin: string type
- quartz-load-capacitance: integer type
- quartz-drive-strength: integer type
- quartz-low-jitter: bool type
- wakeup-source: bool type

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
.../devicetree/bindings/rtc/pcf85363.txt | 31 +++++++++++++++++++
include/dt-bindings/rtc/pcf85363.h | 15 +++++++++
2 files changed, 46 insertions(+)
create mode 100644 include/dt-bindings/rtc/pcf85363.h

diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt
index 94adc1cf93d9..d83359990bd7 100644
--- a/Documentation/devicetree/bindings/rtc/pcf85363.txt
+++ b/Documentation/devicetree/bindings/rtc/pcf85363.txt
@@ -8,10 +8,41 @@ Required properties:
Optional properties:
- interrupts: IRQ line for the RTC (not implemented).

+- interrupt-output-pin: The interrupt output pin must be
+ "NONE", "INTA" or "INTB", default value is "NONE"
+
+- quartz-load-capacitance: The internal capacitor to select for the quartz:
+ PCF85263_QUARTZCAP_7pF [0]
+ PCF85263_QUARTZCAP_6pF [1]
+ PCF85263_QUARTZCAP_12p5pF [2] DEFAULT
+
+- quartz-drive-strength: Drive strength for the quartz:
+ PCF85263_QUARTZDRIVE_NORMAL [0] DEFAULT
+ PCF85263_QUARTZDRIVE_LOW [1]
+ PCF85263_QUARTZDRIVE_HIGH [2]
+
+- quartz-low-jitter: Boolean property, if present enables low jitter mode
+ which reduces jitter at the cost of increased power consumption.
+
+- wakeup-source: Boolean property, mark the chip as a wakeup source,
+ independently of the availability of an IRQ line connected to the SoC.
+ This is useful if the IRQ line is connected to a PMIC or other circuit
+ that can power up the device rather than to a normal SOC interrupt.
+
Example:

pcf85363: pcf85363@51 {
compatible = "nxp,pcf85363";
reg = <0x51>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+ #include <dt-bindings/rtc/pcf85363.h>
+ wakeup-source;
+ interrupt-output-pin = "INTA";
+ quartz-load-capacitance = <PCF85363_QUARTZCAP_12p5pF>;
+ quartz-drive-strength = <PCF85363_QUARTZDRIVE_LOW>;
+ quartz-low-jitter;
};

diff --git a/include/dt-bindings/rtc/pcf85363.h b/include/dt-bindings/rtc/pcf85363.h
new file mode 100644
index 000000000000..2c06c28eb5ff
--- /dev/null
+++ b/include/dt-bindings/rtc/pcf85363.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _DT_BINDINGS_RTC_PCF85363_H
+#define _DT_BINDINGS_RTC_PCF85363_H
+
+/* Quartz capacitance */
+#define PCF85363_QUARTZCAP_7pF 0
+#define PCF85363_QUARTZCAP_6pF 1
+#define PCF85363_QUARTZCAP_12p5pF 2
+
+/* Quartz drive strength */
+#define PCF85363_QUARTZDRIVE_NORMAL 0
+#define PCF85363_QUARTZDRIVE_LOW 1
+#define PCF85363_QUARTZDRIVE_HIGH 2
+
+#endif /* _DT_BINDINGS_RTC_PCF85363_H */
--
2.17.1
\
 
 \ /
  Last update: 2019-08-30 11:28    [W:0.046 / U:1.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site