lkml.org 
[lkml]   [2019]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 3/4] dt-bindings: ASoC: Add WSA881x bindings
On Thu, Aug 29, 2019 at 9:45 AM Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:
>
> This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
> Amplifier. This Amplifier also has a simple thermal sensor for
> over temperature and speaker protection.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> .../bindings/sound/qcom,wsa881x.yaml | 41 +++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
> new file mode 100644
> index 000000000000..7a486c024732
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license please.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
> +
> +maintainers:
> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +
> +description: |
> + WSA8810 is a class-D smart speaker amplifier and WSA8815
> + is a high-output power class-D smart speaker amplifier.
> + Their primary operating mode uses a SoundWire digital audio
> + interface. This binding is for SoundWire interface.
> +
> +properties:
> + compatible:
> + const: "sdw10217201000"

No need for quotes.

> +
> + reg:
> + maxItems: 1
> +

> + powerdown-gpios:
> + description: GPIO spec for Powerdown/Shutdown line to use
> + maxItems: 1
> +
> + '#thermal-sensor-cells':
> + const: 0

Either of these required?

Here you can put 'additionalProperties: false'

> +
> +examples:
> + - |
> + speaker@0,1 {

This should be under a soundwire bus node.

> + compatible = "sdw10217201000";
> + reg = <0 1>;
> + powerdown-gpios = <&wcdpinctrl 2 0>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> +...
> --
> 2.21.0
>

\
 
 \ /
  Last update: 2019-08-29 17:46    [W:1.153 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site