[lkml]   [2019]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/4] ASoC: codecs: Add WSA881x Smart Speaker amplifier support
Thanks for reviewing v4 patchset, here is v5 with addressing the comments in v4

This patchset adds support to WSA8810/WSA8815 Class-D Smart Speaker
Amplifier which is SoundWire interfaced.
This also adds support to some missing bits in SoundWire bus layer like
Device Tree support.

This patchset along with DB845c machine driver and WCD934x codec driver
has been tested on SDM845 SoC based DragonBoard DB845c with two
WSA8810 speakers.

Most of the code in this driver is rework of Qualcomm downstream drivers
used in Andriod. Credits to Banajit Goswami and Patrick Lai's Team.

Add thermal sensor support in WSA881x.


Changes since v4:
- updated slave bindings according to Rob's and Pierre Suggestion.
- fixup warnings from make dt_binding_check

Srinivas Kandagatla (4):
dt-bindings: soundwire: add slave bindings
soundwire: core: add device tree support for slave devices
dt-bindings: ASoC: Add WSA881x bindings
ASoC: codecs: add wsa881x amplifier support

.../bindings/sound/qcom,wsa881x.yaml | 41 +
.../soundwire/soundwire-controller.yaml | 72 ++
drivers/soundwire/bus.c | 2 +
drivers/soundwire/bus.h | 1 +
drivers/soundwire/slave.c | 52 +
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/wsa881x.c | 1134 +++++++++++++++++
8 files changed, 1314 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
create mode 100644 Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
create mode 100644 sound/soc/codecs/wsa881x.c


 \ /
  Last update: 2019-08-29 16:45    [W:0.103 / U:8.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site