lkml.org 
[lkml]   [2019]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] i3c: master: Check if devices have i3c_dev_boardinfo on i3c_master_add_i3c_dev_locked()
On Thu, 29 Aug 2019 12:19:33 +0200
Vitor Soares <Vitor.Soares@synopsys.com> wrote:

> The I3C devices described in DT might not be attached to the master which
> doesn't allow to assign a specific dynamic address.

I remember testing this when developing the framework, so, unless
another patch regressed it, it should already work. I suspect patch 1
is actually the regressing this use case.

>
> This patch check if a device has i3c_dev_boardinfo and add it to
> i3c_dev_desc structure. In this conditions, the framework will try to
> assign the i3c_dev_boardinfo->init_dyn_addr even if stactic address = 0.
>
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> ---
> drivers/i3c/master.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 4d29e1f..85fbda6 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -1795,6 +1795,23 @@ i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
> return NULL;
> }
>
> +static struct i3c_dev_boardinfo *
> +i3c_master_search_i3c_boardinfo(struct i3c_dev_desc *dev)
> +{
> + struct i3c_master_controller *master = i3c_dev_get_master(dev);
> + struct i3c_dev_boardinfo *boardinfo;
> +
> + if (dev->boardinfo)
> + return NULL;
> +
> + list_for_each_entry(boardinfo, &master->boardinfo.i3c, node) {
> + if (dev->info.pid == boardinfo->pid)
> + return boardinfo;
> + }
> +
> + return NULL;
> +}
> +
> /**
> * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
> * @master: master used to send frames on the bus
> @@ -1816,6 +1833,7 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
> {
> struct i3c_device_info info = { .dyn_addr = addr };
> struct i3c_dev_desc *newdev, *olddev;
> + struct i3c_dev_boardinfo *boardinfo;
> u8 old_dyn_addr = addr, expected_dyn_addr;
> struct i3c_ibi_setup ibireq = { };
> bool enable_ibi = false;
> @@ -1875,6 +1893,10 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
> if (ret)
> goto err_detach_dev;
>
> + boardinfo = i3c_master_search_i3c_boardinfo(newdev);
> + if (boardinfo)
> + newdev->boardinfo = boardinfo;
> +
> /*
> * Depending on our previous state, the expected dynamic address might
> * differ:

\
 
 \ /
  Last update: 2019-08-29 12:46    [W:0.137 / U:34.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site