lkml.org 
[lkml]   [2019]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] arm64: tegra: enable SMMU for SDHCI and EQOS
Date
Enable SMMU translations for SDHCI and EQOS transactions.

Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index ad509bb..0496a87 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -51,6 +51,7 @@
clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
resets = <&bpmp TEGRA194_RESET_EQOS>;
reset-names = "eqos";
+ iommus = <&smmu TEGRA186_SID_EQOS>;
status = "disabled";

snps,write-requests = <1>;
@@ -381,6 +382,7 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC1>;
nvidia,pad-autocal-pull-up-offset-3v3-timeout =
<0x07>;
nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -403,6 +405,7 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC3>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -430,6 +433,7 @@
<&bpmp TEGRA194_CLK_PLLC4>;
resets = <&bpmp TEGRA194_RESET_SDMMC4>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC4>;
nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
--
2.1.4
\
 
 \ /
  Last update: 2019-08-30 00:46    [W:0.203 / U:8.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site