lkml.org 
[lkml]   [2019]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.4 03/15] Bluetooth: btqca: Add a short delay before downloading the NVM
Date
From: Matthias Kaehlcke <mka@chromium.org>

[ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ]

On WCN3990 downloading the NVM sometimes fails with a "TLV response
size mismatch" error:

[ 174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin
[ 174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch

It seems the controller needs a short time after downloading the
firmware before it is ready for the NVM. A delay as short as 1 ms
seems sufficient, make it 10 ms just in case. No event is received
during the delay, hence we don't just silently drop an extra event.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btqca.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 4a62081688501..593fc2a5be0f9 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -363,6 +363,9 @@ int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
return err;
}

+ /* Give the controller some time to get ready to receive the NVM */
+ msleep(10);
+
/* Download NVM configuration */
config.type = TLV_TYPE_NVM;
snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
--
2.20.1
\
 
 \ /
  Last update: 2019-08-29 20:20    [W:0.073 / U:15.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site