lkml.org 
[lkml]   [2019]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 1/2] dt-bindings: phy: intel-sdxc-phy: Add YAML schema for LGM SDXC PHY
Date
Hi Vadivel,

> +...
> diff --git a/Documentation/devicetree/bindings/phy/intel,syscon.yaml
> b/Documentation/devicetree/bindings/phy/intel,syscon.yaml
> new file mode 100644
> index 000000000000..d0b78805e49f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/intel,syscon.yaml
> @@ -0,0 +1,33 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/intel,syscon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Syscon for eMMC/SDXC PHY Device Tree Bindings

This says the binding is for eMMC/SDXC

> +
> +maintainers:
> + - Ramuthevar Vadivel Murugan
> <vadivel.muruganx.ramuthevar@linux.intel.com>
> +
> +properties:
> + compatible:
> + const: intel,syscon

but this is a generic syscon, behind which are many registers, not only for
eMMC/SDXC. Also, the registers will be different for each SoC and needed for
many different drivers, that is why in your example it is called "chiptop"
-> toplevel registers not belonging to a specific HW module.

Rob: Do you also think this "intel,syscon" is too generic?
And the binding should be outside the "phy" folder?

What is the way to support different SoCs with this?
Must the driver referencing this syscon be aware of these differences?

> +
> + reg:
> + maxItems: 1
> +
> + "#reset-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - "#reset-cells"
> +
> +examples:
> + - |
> + sysconf: chiptop@e0020000 {
> + compatible = "intel,syscon", "syscon";
> + reg = <0xe0020000 0x100>;
> + #reset-cells = <1>;
> + };
> --
> 2.11.0

Best regards,
Thomas
\
 
 \ /
  Last update: 2019-08-28 17:37    [W:0.124 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site