lkml.org 
[lkml]   [2019]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] Re: [PATCH] mmc: sunxi: fix unusuable eMMC on some H6 boards by disabling DDR
On Wed, Aug 28, 2019 at 9:43 PM Maxime Ripard <mripard@kernel.org> wrote:
>
> On Wed, Aug 28, 2019 at 09:29:32PM +0800, Chen-Yu Tsai wrote:
> > On Wed, Aug 28, 2019 at 8:52 PM Linus Walleij <linus.walleij@linaro.org> wrote:
> > >
> > > On Sun, Aug 25, 2019 at 5:06 PM Alejandro González
> > > <alejandro.gonzalez.correo@gmail.com> wrote:
> > >
> > > > Jernej Skrabec compared the BSP driver with this
> > > > driver, and found that the BSP driver configures pinctrl to operate at
> > > > 1.8 V when entering DDR mode (although 3.3 V operation is supported), while
> > > > the mainline kernel lacks any mechanism to switch voltages dynamically.
> >
> > AFAIK The Pine H64 does not have the ability to switch I/O voltages. It is
> > fixed to either 1.8V (the default based on the schematics) or 3.3V.
>
> Should that be handled at the board level then maybe?

Yeah. You'd specify which one using vqmmc-supply in the mmc node and
vcc-pc-supply
in the pinctrl node.

ChenYu

\
 
 \ /
  Last update: 2019-08-28 15:47    [W:0.033 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site