lkml.org 
[lkml]   [2019]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: Query on possible bug in the can_create_echo_skb() API
Date
Hi,

Case 1:
can_put_echo_skb(); -> skb = can_create_echo_skb(skb); -> return skb;

In can_create_echo_skb() not using the shared_skb, so we are returning the old skb.
Storing the return value in "skb". But it's a pointer, for storing that need double pointer.
Instead of double-pointer using a single pointer. In this scenario it's ok , we are returning the same SKB.

Case 2:
can_put_echo_skb(skb, ndev, priv->tx_head % priv->tx_max); -> skb = can_create_echo_skb(skb); -> can_skb_set_owner(nskb, skb->sk); - Returning nskb;

shared_skb scenario:
In share-skb case “can_create_echo_skb(skb);” returning "new skb". For storing new skb need a double pointer.

Providing an example for overcoming above issue.
Example:
can_put_echo_skb(struct sk_buff **skb,struct net_device *dev,unsigned int idx);

If you ok with this change, I will send a patch.


Thanks
Srinivas Neeli

> -----Original Message-----
> From: Marc Kleine-Budde <mkl@pengutronix.de>
> Sent: Wednesday, August 28, 2019 1:03 AM
> To: Srinivas Neeli <sneeli@xilinx.com>; wg@grandegger.com
> Cc: Srinivas Goud <sgoud@xilinx.com>; Naga Sureshkumar Relli
> <nagasure@xilinx.com>; Appana Durga Kedareswara Rao
> <appanad@xilinx.com>; linux-can@vger.kernel.org
> Subject: Re: Query on possible bug in the can_create_echo_skb() API
>
> Hello Srinivas Neeli,
>
> please don't send HTML messages to the kernel mailinglists.
>
> On 8/21/19 12:51 PM, Srinivas Neeli wrote:
> > While walking through the CAN core layer dev.c file in the
> > can_put_echo_skb() API [1], Seems to be there is a race condition in
> > the
> > can_create_echo_skb() API, more details below
> >
> > If the skb is a shared skb, we are overwriting the skb pointer [2] in
> > the can_create_echo_skb() API and returning the new skb back.
>
> Where and how is the skb pointer overwritten? Can you explain a bit more.
>
> > If the core layer/drivers use this skb it is not valid any more (it
> > may lead to crash/oops).
> >
> >
> >
> > A possible solution for this issue would make the function input
> > argument should be double-pointer.
> >
> > Please correct me if my analyzation is wrong.
>
> Can you provide a patch of your proposed changes?
>
> regards,
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Industrial Linux Solutions | Phone: +49-231-2826-924 |
> Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |

\
 
 \ /
  Last update: 2019-08-28 13:03    [W:0.091 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site