lkml.org 
[lkml]   [2019]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pinctrl-mcp23s08: Fix property-name in dt-example
Date
The device-tree properties documentation-file specifies the property
"microchip,spi-present-mask" as required for MCP23SXX chips. However,
the device-tree-source example below it uses only "spi-present-mask".
Without "microchip," on the front, the driver will print "missing
spi-present-mask" when it initializes.

Update the device-tree example with the correct property-name.

Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index 625a22e2f211..8b94aa8f5971 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -82,7 +82,7 @@ gpiom1: gpio@0 {
compatible = "microchip,mcp23s17";
gpio-controller;
#gpio-cells = <2>;
- spi-present-mask = <0x01>;
+ microchip,spi-present-mask = <0x01>;
reg = <0>;
spi-max-frequency = <1000000>;
};
--
2.20.1
\
 
 \ /
  Last update: 2019-08-28 21:58    [W:0.072 / U:1.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site