lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 2/3] ASoC: sun4i-i2s: Add regmap field to sign extend sample
On Tue, 27 Aug 2019 at 11:34, Maxime Ripard <mripard@kernel.org> wrote:
>
> On Mon, Aug 26, 2019 at 08:07:33PM +0200, codekipper@gmail.com wrote:
> > From: Marcus Cooper <codekipper@gmail.com>
> >
> > On the newer SoCs such as the H3 and A64 this is set by default
> > to transfer a 0 after each sample in each slot. However the A10
> > and A20 SoCs that this driver was developed on had a default
> > setting where it padded the audio gain with zeros.
> >
> > This isn't a problem whilst we have only support for 16bit audio
> > but with larger sample resolution rates in the pipeline then SEXT
> > bits should be cleared so that they also pad at the LSB. Without
> > this the audio gets distorted.
> >
> > Signed-off-by: Marcus Cooper <codekipper@gmail.com>
>
> If anything, I'd like to have less regmap_fields rather than more of
> them. This is pretty easy to add to one of the callbacks, especially
> since the field itself has been completely reworked from one
> generation to the other.
>
ACK
That's fine....I've been doing that with the patches which follow this.
CK
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

\
 
 \ /
  Last update: 2019-08-27 12:57    [W:0.052 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site