lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 4/4] PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()
On Tue, Aug 20, 2019 at 2:09 AM Denis Efremov <efremov@linux.com> wrote:
>
> Remove pciehp_green_led_{on,off,blink}() and use pciehp_set_indicators()
> instead, since the code is mostly the same.
>
> Signed-off-by: Denis Efremov <efremov@linux.com>
> ---
> drivers/pci/hotplug/pciehp.h | 3 ---
> drivers/pci/hotplug/pciehp_ctrl.c | 12 ++++++++---
> drivers/pci/hotplug/pciehp_hpc.c | 36 -------------------------------
> 3 files changed, 9 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
> index acda513f37d7..da429345cf70 100644
> --- a/drivers/pci/hotplug/pciehp.h
> +++ b/drivers/pci/hotplug/pciehp.h
> @@ -170,9 +170,6 @@ void pciehp_get_power_status(struct controller *ctrl, u8 *status);
> void pciehp_set_indicators(struct controller *ctrl, int pwr, int attn);
> void pciehp_get_latch_status(struct controller *ctrl, u8 *status);
> int pciehp_query_power_fault(struct controller *ctrl);
> -void pciehp_green_led_on(struct controller *ctrl);
> -void pciehp_green_led_off(struct controller *ctrl);
> -void pciehp_green_led_blink(struct controller *ctrl);
> bool pciehp_card_present(struct controller *ctrl);
> bool pciehp_card_present_or_link_active(struct controller *ctrl);
> int pciehp_check_link_status(struct controller *ctrl);
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index 232f7bfcfce9..862fe86e87cc 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -65,7 +65,9 @@ static int board_added(struct controller *ctrl)
> return retval;
> }
>
> - pciehp_green_led_blink(ctrl);
> + pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
> + PCI_EXP_SLTCTL_ATTN_IND_NONE);

I think it woud be good if you provided a helper macro for setting one
of the indicators rather than open coding the _NONE constant. e.g.

#define set_power_indicator(ctrl, x) pciehp_set_indicators(ctrl, (x),
PCI_EXP_SLTCTL_ATTN_IND_NONE);

then you can do:

set_power_indicator(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK);

which is a bit nicer to read.

\
 
 \ /
  Last update: 2019-08-28 01:50    [W:0.107 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site