lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [alsa-devel] [RESEND PATCH v4 1/4] dt-bindings: soundwire: add slave bindings
From
Date


On 26/08/2019 17:22, Pierre-Louis Bossart wrote:
>>>>>
>>>>>> +      description:
>>>>>> +      Is the textual representation of SoundWire Enumeration
>>>>>> +      address. compatible string should contain SoundWire Version
>>>>>> ID,
>>>>>> +      Manufacturer ID, Part ID and Class ID in order and shall be in
>>>>>> +      lower-case hexadecimal with leading zeroes.
>>>>>> +      Valid sizes of these fields are
>>>>>> +      Version ID is 1 nibble, number '0x1' represents SoundWire 1.0
>>>>>> +      and '0x2' represents SoundWire 1.1 and so on.
>>>>>> +      MFD is 4 nibbles
>>>>>> +      PID is 4 nibbles
>>>>>> +      CID is 2 nibbles
>>>>>> +      More Information on detail of encoding of these fields can be
>>>>>> +      found in MIPI Alliance DisCo & SoundWire 1.0 Specifications.
>>>>>> +
>>>>>> +      reg:
>>>>>> +        maxItems: 1
>>>>>> +        description:
>>>>>> +          Instance ID and Link ID of SoundWire Device Address.
>
> maybe put link first and make it clear that both are required.
Okay, I will give that a go in next version!

thanks,
srini

\
 
 \ /
  Last update: 2019-08-27 23:21    [W:0.400 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site