lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] HID: apple: Fix stuck function keys when using FN
From
Date
Hi João,

On 8/12/19 6:57 PM, Benjamin Tissoires wrote:
> Hi João,
>
> On Thu, Aug 8, 2019 at 10:35 PM João Moreno <mail@joaomoreno.com> wrote:
>>
>> Hi Benjamin,
>>
>> On Mon, 8 Jul 2019 at 22:35, João Moreno <mail@joaomoreno.com> wrote:
>>>
>>> Hi Benjamin,
>>>
>>> No worries, also pretty busy over here. Didn't mean to press.
>>>
>>> On Mon, 1 Jul 2019 at 10:32, Benjamin Tissoires
>>> <benjamin.tissoires@redhat.com> wrote:
>>>>
>>>> Hi João,
>>>>
>>>> On Sun, Jun 30, 2019 at 10:15 PM João Moreno <mail@joaomoreno.com> wrote:
>>>>>
>>>>> Hi Jiri & Benjamin,
>>>>>
>>>>> Let me know if you need something else to get this patch moving forward. This
>>>>> fixes an issue I hit daily, it would be great to get it fixed.
>>>>
>>>> Sorry for the delay, I am very busy with internal corporate stuff, and
>>>> I tried setting up a new CI system at home, and instead of spending a
>>>> couple of ours, I am down to 2 weeks of hard work, without possibility
>>>> to switch to the new right now :(
>>>> Anyway.
>>>>
>>>>>
>>>>> Thanks.
>>>>>
>>>>> On Mon, 10 Jun 2019 at 23:31, Joao Moreno <mail@joaomoreno.com> wrote:
>>>>>>
>>>>>> This fixes an issue in which key down events for function keys would be
>>>>>> repeatedly emitted even after the user has raised the physical key. For
>>>>>> example, the driver fails to emit the F5 key up event when going through
>>>>>> the following steps:
>>>>>> - fnmode=1: hold FN, hold F5, release FN, release F5
>>>>>> - fnmode=2: hold F5, hold FN, release F5, release FN
>>>>
>>>> Ouch :/
>>>>
>>>
>>> Right?!
>>>
>>>>>>
>>>>>> The repeated F5 key down events can be easily verified using xev.
>>>>>>
>>>>>> Signed-off-by: Joao Moreno <mail@joaomoreno.com>
>>>>>> ---
>>>>>> drivers/hid/hid-apple.c | 21 +++++++++++----------
>>>>>> 1 file changed, 11 insertions(+), 10 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
>>>>>> index 1cb41992aaa1..81867a6fa047 100644
>>>>>> --- a/drivers/hid/hid-apple.c
>>>>>> +++ b/drivers/hid/hid-apple.c
>>>>>> @@ -205,20 +205,21 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
>>>>>> trans = apple_find_translation (table, usage->code);
>>>>>>
>>>>>> if (trans) {
>>>>>> - if (test_bit(usage->code, asc->pressed_fn))
>>>>>> - do_translate = 1;
>>>>>> - else if (trans->flags & APPLE_FLAG_FKEY)
>>>>>> - do_translate = (fnmode == 2 && asc->fn_on) ||
>>>>>> - (fnmode == 1 && !asc->fn_on);
>>>>>> + int fn_on = value ? asc->fn_on :
>>>>>> + test_bit(usage->code, asc->pressed_fn);
>>>>>> +
>>>>>> + if (!value)
>>>>>> + clear_bit(usage->code, asc->pressed_fn);
>>>>>> + else if (asc->fn_on)
>>>>>> + set_bit(usage->code, asc->pressed_fn);
>>>>
>>>> I have the feeling that this is not the correct fix here.
>>>>
>>>> I might be wrong, but the following sequence might also mess up the
>>>> driver state, depending on how the reports are emitted:
>>>> - hold FN, hold F4, hold F5, release F4, release FN, release F5
>>>>
>>>
>>> I believe this should be fine. Following the code:
>>>
>>> - hold FN, sets asc->fn_on to true
>>> - hold F4, in the trans block fn_on will be true and we'll set the F4
>>> bit in the bitmap
>>> - hold F5, in the trans block fn_on will be true and we'll set the F5 bit
>>> - release F4, in the trans block fn_on will be true (because of the bitmap) and
>>> we'll clear the F4 bit
>>> - release FN, asc->fn_on will be false, but it doesn't matter since...
>>> - release F5, in the trans block we'll look into the bitmap (instead
>>> of asc->fn_on),
>>> so fn_on will be true and we'll clear the F5 bit
>>>
>>> I tested it in practice using my changes:
>>>
>>> Interestingly the Apple keyboard doesn't seem to emit an even for F5 when F4 is
>>> pressed, seems like a hardware limitation. But F6 does work. So, when I execute
>>> these events in that order, everything works as it should: xev reports
>>> the following:
>>>
>>> KeyPress F4
>>> KeyPress F6
>>> KeyRelease F4
>>> KeyRelease F6
>>>
>>>> The reason is that the driver only considers you have one key pressed
>>>> with the modifier, and as the code changed its state based on the last
>>>> value.
>>>>
>>>
>>> I believe the bitmap takes care of storing the FN state per key press. The
>>> trick I did was to check on the global `asc->fn_on` state only when a key
>>> is pressed, but check on the bitmap instead when it's released.
>>>
>>> Let me know what you think. Am I missing something here?
>>>
>>> Cheers,
>>> João.
>>>
>>>> IMO a better fix would:
>>>>
>>>> - keep the existing `trans` mapping lookout
>>>> - whenever a `trans` mapping gets found:
>>>> * get both translated and non-translated currently reported values
>>>> (`test_bit(keycode, input_dev->key)`)
>>>> * if one of them is set to true, then consider the keycode to be the
>>>> one of the key (no matter fn_on)
>>>> -> deal with `value` with the corrected keycode
>>>> * if the key was not pressed:
>>>> -> chose the keycode based on `fn_on` and `fnmode` states
>>>> and report the key press event
>>>>
>>>> This should remove the nasty pressed_fn state which depends on the
>>>> other pressed keys.
>>>>
>>>> Cheers,
>>>> Benjamin
>>>>
>>>>>> +
>>>>>> + if (trans->flags & APPLE_FLAG_FKEY)
>>>>>> + do_translate = (fnmode == 2 && fn_on) ||
>>>>>> + (fnmode == 1 && !fn_on);
>>>>>> else
>>>>>> do_translate = asc->fn_on;
>>>>>>
>>>>>> if (do_translate) {
>>>>>> - if (value)
>>>>>> - set_bit(usage->code, asc->pressed_fn);
>>>>>> - else
>>>>>> - clear_bit(usage->code, asc->pressed_fn);
>>>>>> -
>>>>>> input_event(input, usage->type, trans->to,
>>>>>> value);
>>>>>>
>>>>>> --
>>>>>> 2.19.1
>>>>>>
>>
>> Gave this another look and I still haven't found any issues, let me
>> know if you still
>> think I'm missing something. Thanks!
>>
>
> OK, I am tempted to take the patch, but I'll need to add this as a
> regression test in my test-suite. This is too complex that it can
> easily break next time someone looks at it.
>
> Can you send me the report descriptors of the device using
> hid-recorder from hid-tools[0].
> Ideally, if you can put the faulty sequence in the logs, that would
> help writing down the use case.
>

I finally managed to get the regression tests up in
https://gitlab.freedesktop.org/libevdev/hid-tools/merge_requests/52

This allowed me to better understand the code, and yes, for the F-keys,
I could not find a faulty situation with your patch.

However, the same problem is happening with the arrow keys, as arrow up
is translated to page up.

We *could* adapt your patch to solve this, but I find it really hard to understand.

How about the following diff:
---
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 81df62f48c4c..ef916c0f3c0b 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -54,7 +54,6 @@ MODULE_PARM_DESC(swap_opt_cmd, "Swap the Option (\"Alt\") and Command (\"Flag\")
struct apple_sc {
unsigned long quirks;
unsigned int fn_on;
- DECLARE_BITMAP(pressed_fn, KEY_CNT);
DECLARE_BITMAP(pressed_numlock, KEY_CNT);
};

@@ -181,6 +180,8 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
{
struct apple_sc *asc = hid_get_drvdata(hid);
const struct apple_key_translation *trans, *table;
+ bool do_translate;
+ u16 code = 0;

if (usage->code == KEY_FN) {
asc->fn_on = !!value;
@@ -189,8 +190,6 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
}

if (fnmode) {
- int do_translate;
-
if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI &&
hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS)
table = macbookair_fn_keys;
@@ -202,25 +201,33 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
trans = apple_find_translation (table, usage->code);

if (trans) {
- if (test_bit(usage->code, asc->pressed_fn))
- do_translate = 1;
- else if (trans->flags & APPLE_FLAG_FKEY)
- do_translate = (fnmode == 2 && asc->fn_on) ||
- (fnmode == 1 && !asc->fn_on);
- else
- do_translate = asc->fn_on;
-
- if (do_translate) {
- if (value)
- set_bit(usage->code, asc->pressed_fn);
- else
- clear_bit(usage->code, asc->pressed_fn);
-
- input_event(input, usage->type, trans->to,
- value);
-
- return 1;
+ if (test_bit(trans->from, input->key))
+ code = trans->from;
+ if (test_bit(trans->to, input->key))
+ code = trans->to;
+
+ if (!code) {
+ if (trans->flags & APPLE_FLAG_FKEY) {
+ switch (fnmode) {
+ case 1:
+ do_translate = !asc->fn_on;
+ break;
+ case 2:
+ do_translate = asc->fn_on;
+ break;
+ default:
+ /* should never happen */
+ do_translate = false;
+ }
+ } else {
+ do_translate = asc->fn_on;
+ }
+
+ code = do_translate ? trans->to : trans->from;
}
+
+ input_event(input, usage->type, code, value);
+ return 1;
}

if (asc->quirks & APPLE_NUMLOCK_EMULATION &&
---
This is more or less what I suggested, minus the bug fixes.

I find this easier to understand as the .pressed_fn field is not there
anymore and we just rely on the actual state of the input subsystem.

Comments?

Cheers,
Benjamin


> Cheers,
> Benjamin
>
> [0] https://gitlab.freedesktop.org/libevdev/hid-tools
>

\
 
 \ /
  Last update: 2019-08-27 18:58    [W:0.092 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site