lkml.org 
[lkml]   [2019]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH 00/10] ARM: davinci: use the new clocksource driver
From
Date
On 08/08/19 1:11 PM, Bartosz Golaszewski wrote:
> śr., 7 sie 2019 o 21:28 Sekhar Nori <nsekhar@ti.com> napisał(a):
>>
>> On 05/08/19 1:59 PM, Bartosz Golaszewski wrote:
>>> pon., 22 lip 2019 o 15:17 Bartosz Golaszewski <brgl@bgdev.pl> napisał(a):
>>>>
>>>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>>
>>>> Sekhar,
>>>>
>>>> the following patches switch DaVinci to using the new clocksource driver which
>>>> is now upstream. They are rebased on top of v5.3-rc1. Additionally the
>>>> following two patches were reverted locally due to a regression in v5.3-rc1
>>>> about which the relevant maintainers have been already notified:
>>>>
>>>> 2eef1399a866 modules: fix BUG when load module with rodata=n
>>>> 93651f80dcb6 modules: fix compile error if don't have strict module rwx
>>>>
>>>> Bartosz Golaszewski (10):
>>>> ARM: davinci: enable the clocksource driver for DT mode
>>>> ARM: davinci: WARN_ON() if clk_get() fails
>>>> ARM: davinci: da850: switch to using the clocksource driver
>>>> ARM: davinci: da830: switch to using the clocksource driver
>>>> ARM: davinci: move timer definitions to davinci.h
>>>> ARM: davinci: dm355: switch to using the clocksource driver
>>>> ARM: davinci: dm365: switch to using the clocksource driver
>>>> ARM: davinci: dm644x: switch to using the clocksource driver
>>>> ARM: davinci: dm646x: switch to using the clocksource driver
>>>> ARM: davinci: remove legacy timer support
>>>>
>>>> arch/arm/Kconfig | 1 +
>>>> arch/arm/mach-davinci/Makefile | 3 +-
>>>> arch/arm/mach-davinci/da830.c | 45 +--
>>>> arch/arm/mach-davinci/da850.c | 50 +--
>>>> arch/arm/mach-davinci/davinci.h | 3 +
>>>> arch/arm/mach-davinci/devices-da8xx.c | 1 -
>>>> arch/arm/mach-davinci/devices.c | 19 -
>>>> arch/arm/mach-davinci/dm355.c | 28 +-
>>>> arch/arm/mach-davinci/dm365.c | 26 +-
>>>> arch/arm/mach-davinci/dm644x.c | 28 +-
>>>> arch/arm/mach-davinci/dm646x.c | 28 +-
>>>> arch/arm/mach-davinci/include/mach/common.h | 17 -
>>>> arch/arm/mach-davinci/include/mach/time.h | 35 --
>>>> arch/arm/mach-davinci/time.c | 414 --------------------
>>>> 14 files changed, 110 insertions(+), 588 deletions(-)
>>>> delete mode 100644 arch/arm/mach-davinci/include/mach/time.h
>>>> delete mode 100644 arch/arm/mach-davinci/time.c
>>>>
>>>> --
>>>> 2.21.0
>>>>
>>>
>>> Hi Sekhar,
>>>
>>> a gentle ping. Is this series good to go in for v5.4?
>>
>> Hi Bartosz, a quick test shows that DM365 fails to boot after this. Can
>> you please see if there is anything obviously wrong for that SoC. Rest
>> seems to be okay.
>>
>> Thanks,
>> Sekhar
>
> Hi Sekhar,
>
> just verified on Kevin's dm365-evm rebased on top of v5.3-rc3 and it
> boots fine. I know that davinci failed to boot at v5.3-rc1.
>
> Let me know if I can help with debugging.

Added series except 7/10 and 10/10 to v5.4/soc. Debug of DM365 issue is
still going on offline. DM365 migration is postponed pending conclusion
of that debug.

Thanks,
Sekhar

\
 
 \ /
  Last update: 2019-08-26 15:33    [W:0.067 / U:8.584 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site