Messages in this thread Patch in this message | | | From | Neil Armstrong <> | Subject | [PATCH v2 4/5] arm64: dts: meson-sm1-sei610: add HDMI display support | Date | Fri, 23 Aug 2019 11:04:17 +0200 |
| |
Add the HDMI support nodes for the Amlogic SM1 Based SEI610 Board.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../boot/dts/amlogic/meson-sm1-sei610.dts | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 12dab0ba2f26..66bd3bfbaf91 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -51,6 +51,17 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -177,6 +188,18 @@ phy-mode = "rmii"; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &i2c3 { status = "okay"; pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; -- 2.22.0
| |