lkml.org 
[lkml]   [2019]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 0/5] media: Allwinner A10 CSI support
On Thu, Aug 22, 2019 at 10:21:11AM +0200, Maxime Ripard wrote:
> From: Maxime Ripard <maxime.ripard@bootlin.com>
>
> Hi,
>
> Here is a series introducing the support for the A10 (and SoCs of the same
> generation) CMOS Sensor Interface (called CSI, not to be confused with
> MIPI-CSI, which isn't support by that IP).
>
> That interface is pretty straightforward, but the driver has a few issues
> that I wanted to bring up:
>
> * The only board I've been testing this with has an ov5640 sensor
> attached, which doesn't work with the upstream driver. Copying the
> Allwinner init sequence works though, and this is how it has been
> tested. Testing with a second sensor would allow to see if it's an
> issue on the CSI side or the sensor side.
> * We don't have support for the ISP at the moment, but this can be added
> eventually.

Applied patch 4.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-08-23 09:49    [W:0.044 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site