lkml.org 
[lkml]   [2019]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH RFC 0/4] ACPI: APEI: Add support to notify the vendor specific HW errors
Date
Hi James, 

Thanks for the feedback.

>-----Original Message-----
>From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-
>owner@vger.kernel.org] On Behalf Of James Morse
>Sent: 21 August 2019 18:23
>To: Shiju Jose <shiju.jose@huawei.com>
>Cc: linux-acpi@vger.kernel.org; linux-edac@vger.kernel.org; linux-
>kernel@vger.kernel.org; rjw@rjwysocki.net; lenb@kernel.org;
>tony.luck@intel.com; bp@alien8.de; baicar@os.amperecomputing.com;
>Linuxarm <linuxarm@huawei.com>; Jonathan Cameron
><jonathan.cameron@huawei.com>; tanxiaofei <tanxiaofei@huawei.com>
>Subject: Re: [PATCH RFC 0/4] ACPI: APEI: Add support to notify the vendor
>specific HW errors
>
>Hi,
>
>On 12/08/2019 11:11, Shiju Jose wrote:
>> Presently kernel does not support reporting the vendor specific HW
>> errors, in the non-standard format, to the vendor drivers for the recovery.
>
>'non standard' here is probably a little jarring to the casual reader. You're
>referring to the UEFI spec's "N.2.3 Non-standard Section Body", which refers to
>any section type published somewhere other than the UEFI spec.
OK. I will change it.
>
>These still have to have a GUID to identify them, so they still have the same
>section header format.
Yes.

>
>
>> This patch set add this support and also move the existing handler
>> functions for the standard errors to the new callback method.
>
>Could you give an example of where this would be useful? You're adding an API
>with no caller to justify its existence.
One such example is handling the local errors occurred in a device controller, such as PCIe.

>
>
>GUIDs should only belong to one driver.
UEFI spec's N.2.3 Non-standard Section Body mentioned, "The type (e.g. format) of a non-standard section is identified by the GUID populated in the Section Descriptor's Section Type field."
There is a possibility to define common non-standard error section format which will be used for more than one driver if the error data to be reported is in the same format. Then can the same GUID belong to multiple drivers?

>
>I don't think we should call drivers for something described as a fatal error.
>(which is the case with what you have here)
The notification is intended only for the recoverable errors as the ghes_proc() call panic for the fatal errors in the early stage.

>
>
>> Also the CCIX RAS patches could be move to the proposed callback method.
>
>Presumably for any vendor-specific stuff?
This information was related to the proposal to replace the number of if(guid_equal(...)) else if(guid_equal(...)) checks in the ghes_do_proc() for the existing UEFI spec defined error sections(such as PCIe, Memory, ARM HW error) by registering the corresponding handler functions to the proposed notification method. The same apply to the CCIX error sections and any other error sections defined by the UEFI spec in the future.

>
>
>Thanks,
>
>James

Thanks,
Shiju

\
 
 \ /
  Last update: 2019-08-22 18:59    [W:0.077 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site