lkml.org 
[lkml]   [2019]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] dt-bindings: display/bridge: Add binding for NWL mipi dsi host controller
Hi Laurent,
thanks for having a look!

On Wed, Aug 21, 2019 at 09:15:18PM +0300, Laurent Pinchart wrote:
> Hi Guido,
>
> Thank you for the patch.
>
> On Fri, Aug 09, 2019 at 06:24:22PM +0200, Guido Günther wrote:
> > The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.
> >
> > Signed-off-by: Guido Günther <agx@sigxcpu.org>
> > ---
> > .../bindings/display/bridge/nwl-dsi.yaml | 155 ++++++++++++++++++
> > 1 file changed, 155 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> > new file mode 100644
> > index 000000000000..5ed8bc4a4d18
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> > @@ -0,0 +1,155 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/imx-nwl-dsi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Northwest Logic MIPI-DSI on imx SoCs
> > +
> > +maintainers:
> > + - Guido Gúnther <agx@sigxcpu.org>
> > + - Robert Chiras <robert.chiras@nxp.com>
> > +
> > +description: |
> > + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
> > + the SOCs NWL MIPI-DSI host controller.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
> > + - const: fsl,imx8mq-nwl-dsi
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: DSI core clock
> > + - description: RX_ESC clock (used in escape mode)
> > + - description: TX_ESC clock (used in escape mode)
> > + - description: PHY_REF clock
> > +
> > + clock-names:
> > + items:
> > + - const: core
> > + - const: rx_esc
> > + - const: tx_esc
> > + - const: phy_ref
> > +
> > + phys:
> > + maxItems: 1
> > + description:
> > + A phandle to the phy module representing the DPHY
> > +
> > + phy-names:
> > + items:
> > + - const: dphy
> > +
> > + power-domains:
> > + maxItems: 1
> > + description:
> > + A phandle to the power domain
> > +
> > + resets:
> > + maxItems: 4
> > + description:
> > + A phandle to the reset controller
> > +
> > + reset-names:
> > + items:
> > + - const: byte
> > + - const: dpi
> > + - const: esc
> > + - const: pclk
> > +
> > + mux-sel:
> > + maxItems: 1
> > + description:
> > + A phandle to the MUX register set
>
> Did you mean the MUX syscon ? A phandle to a register set sounds a bit
> strange.

That one is gone in v3 in favour of mux-controls.

>
> > +
> > + port:
> > + type: object
> > + description:
> > + A input put or output port node.
>
> s/input put/input/

Thanks! I've shuffled this around in v3 and added some more detail.
Cheers,
-- Guido

>
> > +
> > + ports:
> > + type: object
> > + description:
> > + A node containing DSI input & output port nodes with endpoint
> > + definitions as documented in
> > + Documentation/devicetree/bindings/graph.txt.
> > +
> > +patternProperties:
> > + "^panel@[0-9]+$": true
> > +
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx8mq-nwl-dsi
> > + then:
> > + required:
> > + - resets
> > + - reset-names
> > + - mux-sel
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - phys
> > + - phy-names
> > +
> > +examples:
> > + - |
> > +
> > + mipi_dsi: mipi_dsi@30a00000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "fsl,imx8mq-nwl-dsi";
> > + reg = <0x30A00000 0x300>;
> > + clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>;
> > + clock-names = "core", "rx_esc", "tx_esc", "phy_ref";
> > + interrupts = <0 34 4>;
> > + power-domains = <&pgc_mipi>;
> > + resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>;
> > + reset-names = "byte", "dpi", "esc", "pclk";
> > + mux-sel = <&iomuxc_gpr>;
> > + phys = <&dphy>;
> > + phy-names = "dphy";
> > +
> > + panel@0 {
> > + compatible = "...";
> > + port@0 {
> > + panel_in: endpoint {
> > + remote-endpoint = <&mipi_dsi_out>;
> > + };
> > + };
> > + };
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + mipi_dsi_in: endpoint {
> > + remote-endpoint = <&lcdif_mipi_dsi>;
> > + };
> > + };
> > + port@1 {
> > + reg = <1>;
> > + mipi_dsi_out: endpoint {
> > + remote-endpoint = <&panel_in>;
> > + };
> > + };
> > + };
> > + };
>
> --
> Regards,
>
> Laurent Pinchart
>

\
 
 \ /
  Last update: 2019-08-22 12:49    [W:0.102 / U:8.184 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site