Messages in this thread | | | Subject | Re: [PATCH 4/5] arm64: dts: meson-sm1-sei610: add HDMI display support | From | Neil Armstrong <> | Date | Thu, 22 Aug 2019 10:23:31 +0200 |
| |
On 22/08/2019 01:31, Kevin Hilman wrote: > Neil Armstrong <narmstrong@baylibre.com> writes: > >> Update compatible of the pwc-vpu node and add the HDMI support nodes >> for the Amlogic SM1 Based SEI610 Board. > > I think this changelog is out of date. It's not doing anything with the > VPU pwrc node.
Exact, thanks for pointing it
> > Kevin > >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >> --- >> .../boot/dts/amlogic/meson-sm1-sei610.dts | 23 +++++++++++++++++++ >> 1 file changed, 23 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts >> index 12dab0ba2f26..66bd3bfbaf91 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts >> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts >> @@ -51,6 +51,17 @@ >> }; >> }; >> >> + hdmi-connector { >> + compatible = "hdmi-connector"; >> + type = "a"; >> + >> + port { >> + hdmi_connector_in: endpoint { >> + remote-endpoint = <&hdmi_tx_tmds_out>; >> + }; >> + }; >> + }; >> + >> leds { >> compatible = "gpio-leds"; >> >> @@ -177,6 +188,18 @@ >> phy-mode = "rmii"; >> }; >> >> +&hdmi_tx { >> + status = "okay"; >> + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; >> + pinctrl-names = "default"; >> +}; >> + >> +&hdmi_tx_tmds_port { >> + hdmi_tx_tmds_out: endpoint { >> + remote-endpoint = <&hdmi_connector_in>; >> + }; >> +}; >> + >> &i2c3 { >> status = "okay"; >> pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; >> -- >> 2.22.0
| |