lkml.org 
[lkml]   [2019]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] rtc: sun6i: Add support for H6 RTC
On 20/08/2019 17:19:33+0200, megous@megous.com wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> RTC on H6 is mostly the same as on H5 and H3. It has slight differences
> mostly in features that are not yet supported by this driver.
>
> Some differences are already stated in the comments in existing code.
> One other difference is that H6 has extra bit in LOSC_CTRL_REG, called
> EXT_LOSC_EN to enable/disable external low speed crystal oscillator.
>
> It also has bit EXT_LOSC_STA in LOSC_AUTO_SWT_STA_REG, to check whether
> external low speed oscillator is working correctly.
>
> This patch adds support for enabling LOSC when necessary:
>
> - during reparenting
> - when probing the clock
>
> H6 also has capacbility to automatically reparent RTC clock from
> external crystal oscillator, to internal RC oscillator, if external
> oscillator fails. This is enabled by default. Disable it during
> probe.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> ---
> drivers/rtc/rtc-sun6i.c | 40 ++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 38 insertions(+), 2 deletions(-)
>
Applied, thanks.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-08-22 23:18    [W:0.142 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site