lkml.org 
[lkml]   [2019]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 73/85] bnx2x: Fix VFs VLAN reconfiguration in reload.
Date
From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 4a4d2d372fb9b9229327e2ed01d5d9572eddf4de ]

Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as
part of unload sequence."), introduced a regression in driver
that as a part of VF's reload flow, VLANs created on the VF
doesn't get re-configured in hardware as vlan metadata/info
was not getting cleared for the VFs which causes vlan PING to stop.

This patch clears the vlan metadata/info so that VLANs gets
re-configured back in the hardware in VF's reload flow and
PING/traffic continues for VLANs created over the VFs.

Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 7 ++++---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 ++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 17 ++++++++++++-----
3 files changed, 18 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3058,12 +3058,13 @@ int bnx2x_nic_unload(struct bnx2x *bp, i
/* if VF indicate to PF this function is going down (PF will delete sp
* elements and clear initializations
*/
- if (IS_VF(bp))
+ if (IS_VF(bp)) {
+ bnx2x_clear_vlan_info(bp);
bnx2x_vfpf_close_vf(bp);
- else if (unload_mode != UNLOAD_RECOVERY)
+ } else if (unload_mode != UNLOAD_RECOVERY) {
/* if this is a normal/close unload need to clean up chip*/
bnx2x_chip_cleanup(bp, unload_mode, keep_link);
- else {
+ } else {
/* Send the UNLOAD_REQUEST to the MCP */
bnx2x_send_unload_req(bp, unload_mode);

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -425,6 +425,8 @@ void bnx2x_set_reset_global(struct bnx2x
void bnx2x_disable_close_the_gate(struct bnx2x *bp);
int bnx2x_init_hw_func_cnic(struct bnx2x *bp);

+void bnx2x_clear_vlan_info(struct bnx2x *bp);
+
/**
* bnx2x_sp_event - handle ramrods completion.
*
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8488,11 +8488,21 @@ int bnx2x_set_vlan_one(struct bnx2x *bp,
return rc;
}

+void bnx2x_clear_vlan_info(struct bnx2x *bp)
+{
+ struct bnx2x_vlan_entry *vlan;
+
+ /* Mark that hw forgot all entries */
+ list_for_each_entry(vlan, &bp->vlan_reg, link)
+ vlan->hw = false;
+
+ bp->vlan_cnt = 0;
+}
+
static int bnx2x_del_all_vlans(struct bnx2x *bp)
{
struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj;
unsigned long ramrod_flags = 0, vlan_flags = 0;
- struct bnx2x_vlan_entry *vlan;
int rc;

__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
@@ -8501,10 +8511,7 @@ static int bnx2x_del_all_vlans(struct bn
if (rc)
return rc;

- /* Mark that hw forgot all entries */
- list_for_each_entry(vlan, &bp->vlan_reg, link)
- vlan->hw = false;
- bp->vlan_cnt = 0;
+ bnx2x_clear_vlan_info(bp);

return 0;
}

\
 
 \ /
  Last update: 2019-08-22 19:56    [W:0.252 / U:2.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site