lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/8] PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
Date
On Tue, 2019-08-20 at 20:54 +0100, Andrew Murray wrote:
> On Tue, Aug 20, 2019 at 05:06:22PM +0000, Chocron, Jonathan wrote:
> > On Tue, 2019-08-20 at 16:25 +0100, Andrew Murray wrote:
> > > On Tue, Aug 20, 2019 at 02:52:30PM +0000, Chocron, Jonathan
> > > wrote:
> > > > On Mon, 2019-08-19 at 19:23 +0100, Andrew Murray wrote:
> > > > > On Tue, Jul 23, 2019 at 12:25:29PM +0300, Jonathan Chocron
> > > > > wrote:
> > > > > > The Root Port (identified by [1c36:0032]) doesn't support
> > > > > > MSI-
> > > > > > X. On
> > > > > > some
> > > > >
> > > > > Shouldn't this read [1c36:0031]?
> > > > >
> > > >
> > > > Indeed. Thanks for catching this.
> > > >
> > > > >
> > > > > > platforms it is configured to not advertise the capability
> > > > > > at
> > > > > > all,
> > > > > > while
> > > > > > on others it (mistakenly) does. This causes a panic during
> > > > > > initialization by the pcieport driver, since it tries to
> > > > > > configure
> > > > > > the
> > > > > > MSI-X capability. Specifically, when trying to access the
> > > > > > MSI-X
> > > > > > table
> > > > > > a "non-existing addr" exception occurs.
> > > > > >
> > > > > > Example stacktrace snippet:
> > > > > >
> > > > > > [ 1.632363] SError Interrupt on CPU2, code 0xbf000000 --
> > > > > > SError
> > > > > > [ 1.632364] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
> > > > > > 5.2.0-
> > > > > > rc1-
> > > > > > Jonny-14847-ge76f1d4a1828-dirty #33
> > > > > > [ 1.632365] Hardware name: Annapurna Labs Alpine V3 EVP
> > > > > > (DT)
> > > > > > [ 1.632365] pstate: 80000005 (Nzcv daif -PAN -UAO)
> > > > > > [ 1.632366] pc : __pci_enable_msix_range+0x4e4/0x608
> > > > > > [ 1.632367] lr : __pci_enable_msix_range+0x498/0x608
> > > > > > [ 1.632367] sp : ffffff80117db700
> > > > > > [ 1.632368] x29: ffffff80117db700 x28: 0000000000000001
> > > > > > [ 1.632370] x27: 0000000000000001 x26: 0000000000000000
> > > > > > [ 1.632372] x25: ffffffd3e9d8c0b0 x24: 0000000000000000
> > > > > > [ 1.632373] x23: 0000000000000000 x22: 0000000000000000
> > > > > > [ 1.632375] x21: 0000000000000001 x20: 0000000000000000
> > > > > > [ 1.632376] x19: ffffffd3e9d8c000 x18: ffffffffffffffff
> > > > > > [ 1.632378] x17: 0000000000000000 x16: 0000000000000000
> > > > > > [ 1.632379] x15: ffffff80116496c8 x14: ffffffd3e9844503
> > > > > > [ 1.632380] x13: ffffffd3e9844502 x12: 0000000000000038
> > > > > > [ 1.632382] x11: ffffffffffffff00 x10: 0000000000000040
> > > > > > [ 1.632384] x9 : ffffff801165e270 x8 : ffffff801165e268
> > > > > > [ 1.632385] x7 : 0000000000000002 x6 : 00000000000000b2
> > > > > > [ 1.632387] x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000
> > > > > > [ 1.632388] x3 : 0000000000000000 x2 : 0000000000000000
> > > > > > [ 1.632390] x1 : 0000000000000000 x0 : ffffffd3e9844680
> > > > > > [ 1.632392] Kernel panic - not syncing: Asynchronous
> > > > > > SError
> > > > > > Interrupt
> > > > > > [ 1.632393] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
> > > > > > 5.2.0-
> > > > > > rc1-
> > > > > > Jonny-14847-ge76f1d4a1828-dirty #33
> > > > > > [ 1.632394] Hardware name: Annapurna Labs Alpine V3 EVP
> > > > > > (DT)
> > > > > > [ 1.632394] Call trace:
> > > > > > [ 1.632395] dump_backtrace+0x0/0x140
> > > > > > [ 1.632395] show_stack+0x14/0x20
> > > > > > [ 1.632396] dump_stack+0xa8/0xcc
> > > > > > [ 1.632396] panic+0x140/0x334
> > > > > > [ 1.632397] nmi_panic+0x6c/0x70
> > > > > > [ 1.632398] arm64_serror_panic+0x74/0x88
> > > > > > [ 1.632398] __pte_error+0x0/0x28
> > > > > > [ 1.632399] el1_error+0x84/0xf8
> > > > > > [ 1.632400] __pci_enable_msix_range+0x4e4/0x608
> > > > > > [ 1.632400] pci_alloc_irq_vectors_affinity+0xdc/0x150
> > > > > > [ 1.632401] pcie_port_device_register+0x2b8/0x4e0
> > > > > > [ 1.632402] pcie_portdrv_probe+0x34/0xf0
> > > > > >
> > > > > > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
> > > > > > Reviewed-by: Gustavo Pimentel <
> > > > > > gustavo.pimentel@synopsys.com>
> > > > > > ---
> > > > > > drivers/pci/quirks.c | 15 +++++++++++++++
> > > > > > 1 file changed, 15 insertions(+)
> > > > > >
> > > > > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > > > > > index 23672680dba7..11f843aa96b3 100644
> > > > > > --- a/drivers/pci/quirks.c
> > > > > > +++ b/drivers/pci/quirks.c
> > > > > > @@ -2925,6 +2925,21 @@
> > > > > > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
> > > > > > quirk_msi_intx_disable_qca_bug);
> > > > > > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
> > > > > > quirk_msi_intx_disable_qca_bug);
> > > > > > +
> > > > > > +/*
> > > > > > + * Amazon's Annapurna Labs 1c36:0031 Root Ports don't
> > > > > > support
> > > > > > MSI-
> > > > > > X, so it
> > > > > > + * should be disabled on platforms where the device
> > > > > > (mistakenly)
> > > > > > advertises it.
> > > > > > + *
> > > > > > + * The 0031 device id is reused for other non Root Port
> > > > > > device
> > > > > > types,
> > > > > > + * therefore the quirk is registered for the
> > > > > > PCI_CLASS_BRIDGE_PCI
> > > > > > class.
> > > > > > + */
> > > > > > +static void quirk_al_msi_disable(struct pci_dev *dev)
> > > > > > +{
> > > > > > + dev->no_msi = 1;
> > > > > > + pci_warn(dev, "Disabling MSI-X\n");
> > > > >
> > > > > This will disable both MSI and MSI-X support - is this really
> > > > > the
> > > > > intention
> > > > > here? Do the root ports support MSI and legacy, or just
> > > > > legacy?
> > > > >
> > > >
> > > > The HW should support MSI, but we currently don't have a use
> > > > case
> > > > for
> > > > it so it hasn't been tested and therefore we are okay with
> > > > disabling
> > > > it.
> > >
> > > OK - then the commit message and comment (for
> > > quirk_al_msi_disable)
> > > should
> > > probably be updated to reflect this.
> >
> > If you mean that we should explicitly state that MSI is possibly
> > supported then I don't think it is very relevant here. If we decide
> > to
> > test and enable it in the future, then the new quirk (which would
> > only
> > disable MSI-x) would reflect the fact that MSI works. Sounds ok?
> >
>
> My thought process is that 1c36:0031 probably advertises an MSI
> capability
> reflecting that the device probably supports MSI - if there is no
> valid
> reason for disabling MSI support then we shouldn't disable it.
>
> It doesn't make sense to me to disable it just because that's the
> path of
> least resistance - a better course of action would be to add support
> to disable MSI-X in the kernel.
>
It's not because it's the path of least resistance. As I've stated, we
currently have no use case for it. Adding support in the kernel for
differentiation between MSI and MSI-X sounds like a good idea, but as
far as I see it, isn't a prerequisite for this patch.

> The kernel panic generated in attempting to enable MSI-X shows that
> this
> device has a user for its MSI/MSI-X interrupts. Thus if you disabled
> only
> MSI-X the PCIe port driver would use MSI interrupts instead - Due to
> "no_msi = 1" I guess it will be using legacy.
>
This doesn't necessarily mean that there is a user for Message signaled
interrupts, since it could simply be a HW default of the core to expose
these capabilities while in the specific instantiation, proper support
wasn't implemented (which is the case for MSI-X, resulting in this
patch). Theoretically, it is possible that MSI works, but since it
isn't required and no existing way to keep just MSI enabled, I don't
see why this patch should be blocked by this.

> > > Especially given that the device id
> > > may be used on other device types - implying that a use-case for
> > > this
> > > may later arise.
> > >
> >
> > Not sure I understood that last line. This patch is relevant only
> > for
> > the BRIDGE class 0x0031 device. The other device types, which
> > (sadly)
> > happen to re-use the dev_id, have are totally different and
> > shouldn't
> > be mixed in here.
> >
>
> It's probably unlikely, but if 1c36:0031 was the device ID given to a
> future incarnation of this hardware in a PCIe switch (which has
> BRIDGE
> class), then using legacy interrupts instead of MSI wouldn't be ideal
> and an un-necessary limitation.
>
> This is why adding a comment to indicate that MSI may work but hasn't
> been tested may be helpful for others in the future.
>
No problem, will be added in v4.

> > > >
> > > > For future knowledge, how can just MSI-X be disabled?
> > > > I see that in pcie_port_enable_irq_vec(), the pcieport driver
> > > > calls
> > > > pci_alloc_irq_vectors() with PCI_IRQ_MSIX | PCI_IRQ_MSI. And
> > > > internally, both __pci_enable_msix_range() and
> > > > __pci_enable_msi_range()
> > > > use pci_msi_supported() which doesn't differentiate between MSI
> > > > and
> > > > MSI-x.
> > >
> > > The documentation [1] would suggest that once upon a time
> > > pci_disable_msix
> > > was used - but now should let pci_alloc_irq_vectors cap the max
> > > number
> > > of vectors. However in your case it's the PCIe port driver that
> > > is
> > > attempting
> > > to allocate MSI-X's and so the solution isn't an obvious one.
> > >
> > > Setting dev->msix_enabled to false (i.e. through
> > > pci_disable_msix)
> > > would
> > > result in an un-necessary WARN_ON_ONCE.
> >
> > Per my understanding, it seems that dev->msix_enabled indicates if
> > the
> > MSI-X capability has already been enabled or not, and not as an
> > indication if it is supported by the device. If that is the case,
> > then
> > not sure pci_disable_msix() would result in the desired effect.
>
> Yes this isn't the right approach.
>
> >
> > > I think you'd need to ensure
> > > devi->msix_cap is NULL (which makes sense as your hardware
> > > shouldn't
> > > be
> > > exposing this capability).
> > >
> > > I guess the right way of achieving this would be through a quirk,
> > > though you'd
> > > be the first to do this and you'd have to ensure the quirk runs
> > > before
> > > anyone tests for msix_cap.
> > >
> > > That's my view, though others may have different suggestions.
> > >
> >
> > I think that maybe a dev->no_msix field should be added and then a
> > corresponding pci_msix_supported() function as well. I'd be glad to
> > take it offline or on a dedicated thread, but it shouldn't block
> > this
> > patchset.
>
> Thanks,
>
> Andrew Murray
>
Thanks for your review!

> >
> > > [1] Documentation/PCI/msi-howto.rst
> > >
> > > Thanks,
> > >
> > > Andrew Murray
> > >
> > > >
> > > > > Thanks,
> > > > >
> > > > > Andrew Murray
> > > > >
> > > > > > +}
> > > > > > +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPUR
> > > > > > NA_L
> > > > > > ABS,
> > > > > > 0x0031,
> > > > > > + PCI_CLASS_BRIDGE_PCI, 8,
> > > > > > quirk_al_msi_disable);
> > > > > > #endif /* CONFIG_PCI_MSI */
> > > > > >
> > > > > > /*
> > > > > > --
> > > > > > 2.17.1
> > > > > >
\
 
 \ /
  Last update: 2019-08-21 12:31    [W:0.094 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site