lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 5/8] arm64: dts: qcom: sm8150-mtp: add base dts file
On Tue, Aug 20, 2019 at 10:55 PM Vinod Koul <vkoul@kernel.org> wrote:
>
> This add base DTS file for sm8150-mtp and enables boot to console, adds
> tlmm reserved range, resin node, volume down key and also includes pmic
> file.

For some reason, your mailer sent out 2 patches 5/8. I was wondering
why the patch 5 failed to apply, but it seems the two are identical.
Lore seems to show the same.


> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 51 +++++++++++++++++++++++++
> 2 files changed, 52 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8150-mtp.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 0a7e5dfce6f7..1964dacaf19b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -12,5 +12,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> new file mode 100644
> index 000000000000..6f5777f530ae
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2019, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include "sm8150.dtsi"
> +#include "pm8150.dtsi"
> +#include "pm8150b.dtsi"
> +#include "pm8150l.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. SM8150 MTP";
> + compatible = "qcom,sm8150-mtp";
> +
> + aliases {
> + serial0 = &uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&pon {
> + pwrkey {
> + status = "okay";
> + };
> +
> + resin {
> + compatible = "qcom,pm8941-resin";
> + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_VOLUMEDOWN>;
> + };
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <126 4>;
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-08-21 10:35    [W:0.136 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site