Messages in this thread | | | From | Kevin Hilman <> | Subject | Re: [PATCH 4/5] arm64: dts: meson-sm1-sei610: add HDMI display support | Date | Wed, 21 Aug 2019 16:31:58 -0700 |
| |
Neil Armstrong <narmstrong@baylibre.com> writes:
> Update compatible of the pwc-vpu node and add the HDMI support nodes > for the Amlogic SM1 Based SEI610 Board.
I think this changelog is out of date. It's not doing anything with the VPU pwrc node.
Kevin
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > .../boot/dts/amlogic/meson-sm1-sei610.dts | 23 +++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts > index 12dab0ba2f26..66bd3bfbaf91 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts > @@ -51,6 +51,17 @@ > }; > }; > > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > + > leds { > compatible = "gpio-leds"; > > @@ -177,6 +188,18 @@ > phy-mode = "rmii"; > }; > > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; > + pinctrl-names = "default"; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > + > &i2c3 { > status = "okay"; > pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; > -- > 2.22.0
| |