lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 11/11] mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type'
Date
These zones usage has evolved with time and the comments were outdated.
This joins both ZONE_DMA and ZONE_DMA32 explanation and gives up to date
examples on how they are used on different architectures.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes in v2:
- Try another approach merging both zones explanations into one
- Address Christoph's comments
- If this approach doesn't get much traction I'll just drop the patch
from the series as it's not really essential

include/linux/mmzone.h | 46 +++++++++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 19 deletions(-)

diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index d77d717c620c..9c150223d41f 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -356,33 +356,41 @@ struct per_cpu_nodestat {
#endif /* !__GENERATING_BOUNDS.H */

enum zone_type {
-#ifdef CONFIG_ZONE_DMA
/*
- * ZONE_DMA is used when there are devices that are not able
- * to do DMA to all of addressable memory (ZONE_NORMAL). Then we
- * carve out the portion of memory that is needed for these devices.
- * The range is arch specific.
+ * ZONE_DMA and ZONE_DMA32 are used when there are peripherals not able
+ * to DMA to all of the addressable memory (ZONE_NORMAL).
+ * On architectures where this area covers the whole 32 bit address
+ * space ZONE_DMA32 is used. ZONE_DMA is left for the ones with smaller
+ * DMA addressing constraints. This distinction is important as a 32bit
+ * DMA mask is assumed when ZONE_DMA32 is defined. Some 64-bit
+ * platforms may need both zones as they support peripherals with
+ * different DMA addressing limitations.
+ *
+ * Some examples:
+ *
+ * - i386 and x86_64 have a fixed 16M ZONE_DMA and ZONE_DMA32 for the
+ * rest of the lower 4G.
+ *
+ * - arm only uses ZONE_DMA, the size, up to 4G, may vary depending on
+ * the specific device.
+ *
+ * - powerpc only uses ZONE_DMA, the size, up to 2G, may vary
+ * depending on the specific device.
*
- * Some examples
+ * - s390 uses ZONE_DMA fixed to the lower 2G.
*
- * Architecture Limit
- * ---------------------------
- * parisc, ia64, sparc <4G
- * s390, powerpc <2G
- * arm Various
- * alpha Unlimited or 0-16MB.
+ * - arm64 uses ZONE_DMA to mark the area addresable by all
+ * peripherals on the device, and ZONE_DMA32 for the rest of the
+ * lower 4G. ZONE_DMA32 might be left empty.
*
- * i386, x86_64 and multiple other arches
- * <16M.
+ * - ia64 and riscv only use ZONE_DMA32.
+ *
+ * - parisc uses neither.
*/
+#ifdef CONFIG_ZONE_DMA
ZONE_DMA,
#endif
#ifdef CONFIG_ZONE_DMA32
- /*
- * x86_64 needs two ZONE_DMAs because it supports devices that are
- * only able to do DMA to the lower 16M but also 32 bit devices that
- * can only do DMA areas below 4G.
- */
ZONE_DMA32,
#endif
/*
--
2.22.0
\
 
 \ /
  Last update: 2019-08-20 17:04    [W:0.237 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site