lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v2 3/8] arm64: dts: qcom: pm8150b: Add Base DTS file
    On Tue, Aug 20, 2019 at 12:12:11PM +0530, Vinod Koul wrote:
    > PMIC pm8150b is a slave pmic and this adds base DTS file for pm8150b
    > with pon, adc, and gpio nodes

    All of your other commit messages refers to it as power-on
    instead of pon, be consistent.

    >
    > Signed-off-by: Vinod Koul <vkoul@kernel.org>
    > ---
    > arch/arm64/boot/dts/qcom/pm8150b.dtsi | 84 +++++++++++++++++++++++++++
    > 1 file changed, 84 insertions(+)
    > create mode 100644 arch/arm64/boot/dts/qcom/pm8150b.dtsi
    >
    > diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
    > new file mode 100644
    > index 000000000000..dfb71fb8c90a
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
    > @@ -0,0 +1,84 @@
    > +// SPDX-License-Identifier: BSD-3-Clause
    > +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
    > +// Copyright (c) 2019, Linaro Limited
    > +
    > +#include <dt-bindings/iio/qcom,spmi-vadc.h>
    > +#include <dt-bindings/interrupt-controller/irq.h>
    > +#include <dt-bindings/spmi/spmi.h>
    > +
    > +&spmi_bus {
    > + pmic@2 {
    > + compatible = "qcom,pm8150b", "qcom,spmi-pmic";
    > + reg = <0x2 SPMI_USID>;
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > +
    > + power-on@800 {
    > + compatible = "qcom,pm8916-pon";
    > + reg = <0x0800>;
    > +
    > + status = "disabled";
    > + };
    > +
    > + adc@3100 {
    > + compatible = "qcom,spmi-adc5";
    > + reg = <0x3100>;
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > + #io-channel-cells = <1>;
    > + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
    > +
    > + status = "disabled";
    > +
    > + ref-gnd@0 {
    > + reg = <ADC5_REF_GND>;
    > + qcom,pre-scaling = <1 1>;
    > + label = "ref_gnd";
    > + };
    > +
    > + vref-1p25@1 {
    > + reg = <ADC5_1P25VREF>;
    > + qcom,pre-scaling = <1 1>;
    > + label = "vref_1p25";
    > + };
    > +
    > + die-temp@6 {
    > + reg = <ADC5_DIE_TEMP>;
    > + qcom,pre-scaling = <1 1>;
    > + label = "die_temp";
    > + };
    > +
    > + chg-temp@9 {
    > + reg = <ADC5_CHG_TEMP>;
    > + qcom,pre-scaling = <1 1>;
    > + label = "chg_temp";
    > + };
    > + };
    > +
    > + pm8150b_gpios: gpio@c000 {
    > + compatible = "qcom,pm8150b-gpio";
    > + reg = <0xc000>;
    > + gpio-controller;
    > + #gpio-cells = <2>;
    > + interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc1 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc2 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc3 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc4 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc5 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc6 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc7 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc8 0 IRQ_TYPE_NONE>,
    > + <0x2 0xc9 0 IRQ_TYPE_NONE>,
    > + <0x2 0xca 0 IRQ_TYPE_NONE>,
    > + <0x2 0xcb 0 IRQ_TYPE_NONE>;
    > + };
    > + };
    > +
    > + pmic@3 {
    > + compatible = "qcom,pm8150b", "qcom,spmi-pmic";
    > + reg = <0x3 SPMI_USID>;
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > + };
    > +};
    > --
    > 2.20.1
    >

    \
     
     \ /
      Last update: 2019-08-20 14:27    [W:8.093 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site